TCN75A
1.0 ELECTRICAL
CHARACTERISTICS
Absolute Maximum Ratings †
VDD....................................................................... 6.0V
Voltage at all Input/Output pins .... GND – 0.3V to 5.5V
Storage temperature ..........................-65°C to +150°C
Ambient temp. with power applied .....-55°C to +125°C
Junction Temperature (TJ).................................. 150°C
ESD protection on all pins (HBM:MM)....... (4 kV:400V)
Latch-up current at each pin ......................... ±200 mA
†Notice: Stresses above those listed under “Maximum
ratings” may cause permanent damage to the device. This is
a stress rating only and functional operation of the device at
those or any other conditions above those indicated in the
operational listings of this specification is not implied.
Exposure to maximum rating conditions for extended periods
may affect device reliability.
DC CHARACTERISTICS
Electrical Specifications: Unless otherwise indicated, VDD = 2.7V to 5.5V, GND = Ground, and
TA = -40°C to +125°C.
Parameters
Sym
Min
Typ Max Unit
Conditions
Power Supply
Operating Voltage Range
Operating Current
Shutdown Current
VDD
2.7
IDD
—
ISHDN
—
Power-On Reset (POR) Threshold
VPOR
—
Power Supply Rejection
Δ°C/ΔVDD
—
Temperature Sensor Accuracy
TA = -40°C to +125°C
Internal ΣΔ ADC
TACY
-2
Conversion Time:
0.5°C Resolution
0.25°C Resolution
0.125°C Resolution
0.0625°C Resolution
Alert Output (Open-drain)
tCONV
—
tCONV
—
tCONV
—
tCONV
—
High-level Current
IOH
—
Low-level Voltage
VOL
—
Thermal Response
Response Time
tRES
—
—
5.5
V
200
500
μA Continuous operation
0.1
2
μA Shutdown mode
1.7
—
V VDD falling edge
0.2
—
°C/V VDD = 2.7V to 5.5V
±1
+2
°C VDD = 3.3V
30
—
ms 33 samples/sec (typ.)
60
—
ms 17 samples/sec (typ.)
120
—
ms 8 samples/sec (typ.)
240
—
ms 4 samples/sec (typ.)
—
1
μA VOH = 5V
—
0.4
V IOL= 3 mA
1.4
—
s Time to 63% (89°C)
27°C (air) to 125°C (oil
bath)
DS21935C-page 2
© 2006 Microchip Technology Inc.