TEA1733AT 데이터 시트보기 (PDF) - NXP Semiconductors.

부품명

상세내역

제조사

TEA1733AT

GreenChip SMPS control IC

NXP Semiconductors. 

NXP Semiconductors

TEA1733AT

GreenChip SMPS control IC

7.9 Current mode control (ISENSE pin)

Current mode control is used for its good line regulation.

The primary current is sensed by the ISENSE pin across an external resistor R9 (see

Figure 3) and compared with an internal control voltage.The internal control voltage is

proportional to the CTRL pin voltage (see Figure 6).

0.6

Vsense(max)

(V)

0.4

frequency

reduction

0.2

014aaa931

0

0

1

2

3

4

VCTRL (V)

Fig 6. Peak current control

Leading edge blanking prevents false triggering due to capacitive discharge when

switching on the external power switch (see Figure 7).

tleb

Vsense(max)

VISENSE

Fig 7. Leading edge blanking

t

014aaa932

7.10 Overpower or high/low line compensation

(VINSENSE and ISENSE pins)

The overpower compensation function can be used to realize a maximum output power

which is nearly constant over the full input mains.

The overpower compensation circuit measures the input voltage on the VINSENSE pin

and outputs a proportionally dependent current on the ISENSE pin. The DC voltage

across the soft start resistor limits the maximum peak current on the current sense resistor

(see Figure 8).

TEA1733AT

Preliminary data sheet

All information provided in this document is subject to legal disclaimers.

Rev. 2 — 19 November 2010

© NXP B.V. 2010. All rights reserved.

7 of 18

Share Link: