TK15400 데이터 시트보기 (PDF) - Toko America Inc
부품명
상세내역
제조사
TK15400 Datasheet PDF : 12 Pages
| |||
Y-INPUT
TP1
4.7 µF
75 Ω
Standby
C-INPUT
TP2
4.7 µF
75 Ω
TK15400
TEST CIRCUIT
VCC
VCC = 5.0 V
33 µF
TP7 Y-OUTPUT
VOUT = 2.0 VP-P
+
TP8
33 µF
+
75 Ω
75 Ω
33 µF
TP5
CVBS
VOUT = 2.0 VP-P
+
TP6
33 µF
+
75 Ω
75 Ω
33 µF
TP3 C-OUTPUT
VOUT = 1.3 VP-P
+
33 µF
75 Ω
TP4
75 Ω
GND
MEASUREMENT METHOD
1. Supply Current (ICC)
The Pin 1 current is measured with no input signal and the Standby Pin (Pin 5) open.
2. Standby Supply Current (ISTBY)
The Pin 1 current is measured when the Standby Pin (Pin 5) is connected to ground.
3. Standby Terminal Current (IOS)
The Pin 5 current is measured when Pin 5 is connected to ground.
4. Threshold Voltage (High to Low) (VTHL)
The Pin 5 voltage is measured at the point which changes the device from operating mode into standby mode.
5. Threshold Voltage (Low to High) (VTLH)
The Pin 5 voltage is measured at the point which changes the device from standby mode into operating mode.
6. Clamp Voltage (VCMP)
The DC voltage at Pin 2 is measured with no input signal.
January 2000 TOKO, Inc.
Page 3
Share Link: 