DatasheetQ Logo
Electronic component search and free download site. Transistors,MosFET ,Diode,Integrated circuits

TLP191B 데이터 시트보기 (PDF) - Toshiba

부품명
상세내역
제조사
TLP191B Datasheet PDF : 4 Pages
1 2 3 4
TOSHIBA Photocoupler GaAAs Ired & Photo-Diode Array
TLP191B
Telecommunication
Programmable Controllers
Mos Gate Driver
MOS FET Gate Driver
TLP191B
Unit in mm
The TOSHIBA mini flat coupler TLP191B is a small outline coupler,
suitable for surface mount assembly.
The TLP191B consists of a GaAAs light emitting diode, optically
coupled to a series connected photo diode array with shunt resistor
which is suitable for MOS FET gate drive.
Open voltage: 7.0V(min.)
Short current: 24.0 μA (min.)
Isolation voltage: 2500 Vrms (min.)
UL recognized: UL1577,file no.E67349
Absolute Maximum Ratings (Ta = 25°C)
Characteristic
Forward current
Forward current
derating (Ta 25°C)
LED Pulse forward current
(100μs pulse, 100 pps)
Reverse voltage
Junction temperature
Forward current
Detector Reverse voltage
Junction temperature
Storage temperature range
Operating temperature range
Lead soldering temperature (10s)
Isolation voltage
(AC, 1 min., R.H. 60%) (Note)
Symbol
IF
ΔIF / °C
IFP
VR
Tj
IFD
VRD
Tj
Tstg
Topr
Tsol
BVS
Rating
50
0.5
1
3
125
50
10
125
55~125
40~80
260
2500
Unit
mA
mA / °C
A
V
°C
μA
V
°C
°C
°C
°C
Vrms
TOSHIBA
Weight: 0.09 g
114C1
Pin Configuration(top view)
1
6
3
4
1 . Anode
3 . Cathode
4 . Cathode
6 . Anode
Note: Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the
significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even
if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum
ratings.
Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook
(“Handling Precautions”/“Derating Concept and Methods”) and individual reliability data (i.e. reliability test
report and estimated failure rate, etc).
(Note) Device considered a two terminal device: Pins 1 and 3 shorted together and pins 4 and 6 shorted together.
1
2007-10-01

Share Link: 

datasheetq.com  [ Privacy Policy ]Request Datasheet ] [ Contact Us ]