TS321AIYD 데이터 시트보기 (PDF) - STMicroelectronics

부품명

상세내역

제조사

TS321AIYD

Low Power Single Operational Amplifier

STMicroelectronics 

TS321

Electrical Characteristics

Table 2.

Symbol

Vcc+ = +5V, Vcc- = Ground, Vo = 1.4V, Tamb = +25°C (unless otherwise specified)

Parameter

Conditions

Min. Typ. Max. Unit

SR

GBP

φm

Slew Rate

Gain Bandwith Product

Phase Margin

VCC = +15V, Vi = 0.5 to 3V, RL = 2kΩ,

CL = 100pF, Tamb = +25°C, unity gain

VCC = 30V, f = 100kHz, Tamb = +25°C,

Vin = 10mV, RL = 2kΩ, CL = 100pF

0.4

V/µs

0.8

MHz

60

Degrees

THD

Total Harmonic

Distortion

f = 1kHz, AV = 20dB, RL = 2kΩ, Vo = 2Vpp,

CL = 100pF, Tamb = +25°C, VCC = 30V

0.015

%

en

Equivalent Input Noise

Voltage

f = 1kHz, Rs = 100Ω, VCC = 30V

40

---n---V-----

Hz

1. Vo = 1.4V, Rs = 0W, 5V < VCC+ < 30V, 0 < Vic < VCC+ - 1.5V

2. The direction of the input current is out of the IC. This current is essentially constant, independent of the state of the output

so no loading change exists on the input lines.

3. The input common-mode voltage of either input signal voltage should not be allowed to go negative by more than 0.3V.

The upper end of the common-mode voltage range is VCC+ - 1.5V, but either or both inputs can go to +32V without

damage.

5/12

Share Link: