SWI15-05 데이터 시트보기 (PDF) - International Power DC Power Supplies
부품명
상세내역
제조사
SWI15-05 Datasheet PDF : 2 Pages
| |||
GENERAL SPECIFICATIONS
All specifications are typical at nominal line, full load, and 25°C.
Efficiency:
Hold-up time:
Line regulation:
Inrush current:
Withstand voltage:
Insulation resistance:
Operating temperature:
Storage temperature:
MTBF:
EMI requirements:
Safety requirements:
See Ratings Chart
10 msec at 115 VAC
±1% maximum
30 amps @110 VAC
3000 VAC from input to output
1500 VAC from input to ground
10 Mohm minimum from output
to ground
0°C to +50°C*
–10°C to +70°C
50,000 hours minimum at full load
at 25°C ambient
Meets conduction and radiated limits of:
a) FCC Part 15 J Class B
b) CISPR 22 Class B
Approved to:
a) UL 1310
b) CSA C22.2 No. 22.3
c) EN60950 per TUV
INPUT SPECIFICATIONS
Input voltage:
Input frequency:
Input current:
90 to 264 VAC
47 to 63 Hz
0.3A (rms) for 110 VAC
OUTPUT SPECIFICATIONS
Output voltage:
See Rating Chart
Output current:
See Rating Chart
Output power range: 0 to 15 Watts
Ripple and noise:
See Rating Chart
Overvoltage protection: See Rating Chart
Overcurrent protection: All outputs protected to short
circuit conditions (auto recovery)
Temperature coefficient: All outputs ±0.04%/°C maximum
Transient response: Maximum excursion of 4% on all
models, recovering to 1% of final
value within 200us after a step
load change of 50% to 100% of
rated load.
* Derate from 100% load at 40°C to 66% load at 50°C.
MECHANICAL SPECIFICATIONS
NOTE:
1. Dimensions shown in inches.
2. Weight: 8 ounces approximate.
3. Output connector is 5.5mm outer diameter
barrel. Inner diameter is 2.5mm with center
positive (+)/outer shell negative (-) polarity.
4. Output cable length is 72.0”.
5. Contact factory for optional connectors.
6. Wall mount versions available (consult factory).
International
Power Sources, Inc.
Your Source of Power ...
260 Hopping Brook Road, Holliston, MA 01746
TEL: (508) 429-4440 FAX: (800) 226-2100
83
http://www.intlpower.com
Share Link: 