TS971 데이터 시트보기 (PDF) - STMicroelectronics
부품명
상세내역
제조사
TS971 Datasheet PDF : 17 Pages
| |||
Absolute maximum ratings and operating conditions
TS971-TS972-TS974
1
Absolute maximum ratings and operating conditions
Table 1. Absolute maximum ratings AMR
Symbol
Parameter
Value
Unit
VCC
Vid
Vin
Tstg
Tj
Rthja
Rthjc
ESD
Supply voltage (1)
Differential input voltage (2)
Input voltage (3)
Storage temperature range
Maximum junction temperature
Thermal resistance junction to ambient (4)
SOT23-5
DFN8
SO-8
SO-14
TSSOP8
TSSOP14
DIP8
DIP14
Thermal resistance junction to case(4)
SOT23-5
DFN8
SO-8
SO-14
TSSOP8
TSSOP14
DIP8
DIP14
HBM: human body model(5)
MM: machine model(6)
CDM: charged device model(7)
12
V
±1
V
VDD -0.3 to VCC +0.3
V
-65 to +150
150
°C
250
40
125
105
°C/W
120
100
85
80
81
5.2
40
31
°C/W
37
32
41
33
2
kV
200
V
1.5
kV
Lead temperature (soldering, 10sec)
260
°C
1. All voltage values, except differential voltage are with respect to network ground terminal.
2. Differential voltages are the non-inverting input terminal with respect to the inverting input terminal.
3. The magnitude of input and output voltages must never exceed VCC +0.3V.
4. Short-circuits can cause excessive heating and destructive dissipation. Values are typical.
5. Human body model: A 100pF capacitor is charged to the specified voltage, then discharged through a
1.5kΩ resistor between two pins of the device. This is done for all couples of connected pin combinations
while the other pins are floating.
6. Machine model: A 200pF capacitor is charged to the specified voltage, then discharged directly between
two pins of the device with no external series resistor (internal resistor < 5Ω). This is done for all couples of
connected pin combinations while the other pins are floating.
7. Charged device model: all pins and the package are charged together to the specified voltage and then
discharged directly to the ground through only one pin. This is done for all pins.
No value specified for CDM on SOT23-5 package.
2/17
Share Link: 