TSH120 데이터 시트보기 (PDF) - STMicroelectronics
부품명
상세내역
제조사
TSH120 Datasheet PDF : 13 Pages
| |||
Absolute maximum ratings
1
Absolute maximum ratings
TSH120
Table 1. Absolute maximum ratings
Symbol
Parameter
VCC
Vin
Toper
Tstg
Tj
Rthja
Rthjc
Pmax
ESD
Supply voltage (1)
Input voltage range(2)
Operating free air temperature range
Storage temperature
Maximum junction temperature
Thermal resistance junction to ambient
Thermal resistance junction to case
Maximum power dissipation(3) for Tj=150°C
Ta=+25°C
Ta=+85°C
HBM: human body model (4)
except pin-4
pin-4
MM: machine model (5)
Value
6
2
-40 to +105
-65 to +150
150
430
58
290
150
2
1.5
200
Unit
V
V
°C
°C
°C
°C/W
°C/W
mW
kV
V
Latch-up immunity
200
mA
1. All voltage values are measured with respect to the ground pin.
2. The magnitude of input and output voltage must never exceed VCC +0.3V.
3. Short-circuits can cause excessive heating. Destructive dissipation can result from short-circuits on
amplifiers.
4. Human body model: A 100pF capacitor is charged to the specified voltage, then discharged through a
1.5kΩ resistor between two pins of the device. This is done for all couples of connected pin combinations
while the other pins are floating.
5. Machine model: A 200pF capacitor is charged to the specified voltage, then discharged directly between
two pins of the device with no external series resistor (internal resistor < 5Ω). This is done for all couples of
connected pin combinations while the other pins are floating. This is a minimum value.
Table 2. Operating conditions
Symbol
Parameter
VCC
Supply voltage (1)
1. Tested in full production at +2.5V and +3.3V single supply voltage.
Value
2.2 to 5.5
Unit
V
2/13
Share Link: 