DatasheetQ Logo
Electronic component search and free download site. Transistors,MosFET ,Diode,Integrated circuits

UCB1510DB 데이터 시트보기 (PDF) - Philips Electronics

부품명
상세내역
제조사
UCB1510DB
Philips
Philips Electronics Philips
UCB1510DB Datasheet PDF : 32 Pages
First Prev 11 12 13 14 15 16 17 18 19 20 Next Last
Philips Semiconductors
UCB1510
AC97 digital modem codec
12.2 Codec addressing
Table 28: Codec addressing examples
CMD ADDR CMD DATA Codec ID
(A1, A0)
slot #0
bit 14
slot #0
bit 13
slot #0
bits 1 and 0
0
0
00
Read/Write
slot #1
bit 19
x
1
x
00
1
1
1
00
0
x
x
01
1
x
x
11
0
Transfer
Description
idle
primary read
primary write
secondary read
secondary write
No register data is transferred, slots 1
and 2 are not valid
Read for primary codec register
Write to a primary codec register
Read from the 01 secondary codec
register
Write to a 11 secondary codec register
12.2.1 Primary codec addressing
For addressing a primary codec, bits 1 and 0 of the Tag slot (codec ID A1 and A0)
should be 0. The bits 13 and 14 are used for register data transfer. When the
controller is not sending/receiving control data, it should be addressing the primary
codec. When writing to a register, the bits 14 and 13 (ADDR and DATA valid) should
be set to 1. When reading from a register, only the bit 14 is required to be 1.
12.2.2 Secondary codec addressing
When the Codec ID (A1,A0) is not 00, the controller is addressing a secondary codec
in a read or write sequence. The direction is defined in the slot 1 read/write bit (bit
19).
12.3 PCM sample transfer
Since the AClink frame frequency is defined to be 48kHz, exchanging samples with
the controller at a different sampling rate requires the support of on demand sample
transfer (slot request). The UCB1510 will send samples to the controller and assert
the slot 5 valid bit in the slot#0 (bit10)of the AClink frame. When it needs a new
sample from the controller, it will put a 0 on the slot5req bit in the slot#1 (bit9) of the
AClink frame. When the slot5req bit is 1, it indicates to the controller that no new
sample is needed. When the DAC is not active, the slot5req bit is kept at 0.
9397 750 06856
Preliminary specification
Rev. 01 — 4 February 2000
© Philips Electronics N.V. 2000. All rights reserved.
18 of 32

Share Link: 

datasheetq.com  [ Privacy Policy ]Request Datasheet ] [ Contact Us ]