µPD75518(A)
1. PIN FUNCTIONS
1.1 PORT PINS (1/2)
Pin name
P00
P01
P02
P03
P10
P11
P12
P13
P20
P21
P22
P23
P30Note 2
P31Note 2
P32Note 2
P33Note 2
P40-P43Note 2
P50-P53Note 2
P60
P61
P62
P63
P70
P71
P72
P73
I/O
Also
used as
Function
8-bit I/O
When reset
I/ONote 1
circuit
type
I
INT4 4-bit input port (Port 0).
SCK0 For P01 to P03, pull-up resistors can be
provided by software in units of 3 bits.
SO0/SB0
× Input
SI0/SB1
I
INT0
With noise elimination function × Input
INT1
INT2
TI0
4-bit input port (Port 1).
Pull-up resistors can be provided by software
in units of 4 bits.
I/O PTO0 4-bit I/O port (Port 2).
–
Pull-up resistors can be provided by software
in units of 4 bits.
PCL
× Input
B
F-A
F-B
M-C
B-C
E-B
BUZ
I/O
–
Programmable 4-bit I/O port (Port 3).
–
Input/output can be specified bit by bit.
Pull-up resistors can be provided by software
–
in units of 4 bits.
–
× Input
E-C
I/O
–
N-ch open-drain 4-bit I/O port (Port 4).
r High level
M
A pull-up resistor can be provided bit by bit
(when a pull-up
(mask option).
resistor is
Withstand voltage is 10 V in open-drain mode.
provided) or
high impedance
I/O
–
N-ch open-drain 4-bit I/O port (Port 5).
A pull-up resistor can be provided bit by bit
(mask option).
Withstand voltage is 10 V in open-drain mode.
High level
M
(when a pull-up
resistor is
provided) or
high impedance
I/O KR0 Programmable 4-bit I/O port (Port 6).
KR1 Input/output can be specified bit by bit.
Pull-up resistors can be provided by software
KR2
in units of 4 bits.
KR3
r Input
F-C
I/O KR4 4-bit I/O port (Port 7).
KR5 Pull-up resistors can be provided by software
in units of 4 bits.
KR6
Input
F-A
KR7
Notes 1. The circuits enclosed in circles have a Schmitt-triggered input.
2. An LED can be driven directly.
7