W40S01 데이터 시트보기 (PDF) - Cypress Semiconductor

부품명

상세내역

제조사

W40S01

SDRAM Buffer - 4 DIMM

Cypress Semiconductor 

W40S01-04

How To Use the Serial Data Interface

Electrical Requirements

Figure 1 illustrates electrical characteristics for the serial inter-

face bus used with the W40S01-04. Devices send data over

the bus with an open drain logic output that can (a) pull the bus

line LOW, or (b) let the bus default to logic 1. The pull-up resis-

tor on the bus (both clock and data lines) establish a default

logic 1. All bus devices generally have logic inputs to receive

data.

Although the W40S01-04 is a receive-only device (no data

write-back capability), it does transmit an “acknowledge” data

pulse after each byte is received. Thus, the SDATA line can

both transmit and receive data.

The pull-up resistor should be sized to meet the rise and fall

times specified in AC parameters, taking into consideration to-

tal bus line capacitance.

9''

9''

6(5,$/ %86 '$7$ /,1(

6(5,$/ %86 &/2&. /,1(

&/2&. ,1

&/2&. 287

6'&/.

'$7$ ,1

1 '$7$ 287

a NΩ

a NΩ

6'$7$

1

&/2&. ,1

6&/2&.

'$7$ ,1

'$7$ 287

6'$7$

1

&+,3 6(7

6(5,$/ %86 0$67(5 75$160,77(5

&/2&. '(9,&(

6(5,$/ %86 6/$9( 5(&(,9(5

Figure 1. Serial Interface Bus Electrical Characteristics

5

Share Link: