XU1000 데이터 시트보기 (PDF) - Mimix Broadband

부품명

상세내역

제조사

XU1000

17.0-27.0 GHz GaAs MMIC Transmitter

Mimix Broadband 

17.0-27.0 GHz GaAs MMIC

Transmitter

May 2005 - Rev 13-May-05

U1000

Features

Fundamental Transmitter

Low DC Power Consumption

Optional Power Bias Configuration

0.0 dB Conversion Gain

+12.0 dBm Third Order Intercept (IIP3)

100% On-Wafer RF and DC Testing

100% Visual Inspection to MIL-STD-883

Method 2010

Chip Device Layout

General Description

Mimix Broadband’s 17.0-27.0 GHz GaAs MMIC

transmitter has a small signal conversion gain of 0.0

dB with a third order intercept of +12.0 dBm across

the band. The device is a single fundamental mixer

followed by a single stage amplifier. This MMIC uses

Mimix Broadband’s 0.15 µm GaAs PHEMT device

model technology, and is based upon electron beam

lithography to ensure high repeatability and

uniformity.The chip has surface passivation to protect

and provide a rugged part with backside via holes

and gold metallization to allow either a conductive

epoxy or eutectic solder die attach process. This

device is well suited for Millimeter-wave Point-to-

Point Radio, LMDS, SATCOM and VSAT applications.

Absolute Maximum Ratings

Supply Voltage (Vd)

Supply Current (Id)

Gate Bias Voltage (Vg)

Input Power (IF Pin)

Storage Temperature (Tstg)

Operating Temperature (Ta)

Channel Temperature (Tch)

+6.0 VDC

50 mA

+0.3 VDC

+10 dBm

-65 to +165 OC

-55 to MTTF Table3

MTTF Table3

(3) Channel temperature affects a device's MTTF. It is

recommended to keep channel temperature as low as

possible for maximum life.

Electrical Characteristics (Ambient Temperature T = 25 oC)

Parameter

Units Min. Typ. Max.

Frequency Range (RF) Upper Side Band

GHz

17.0

-

27.0

Frequency Range (RF) Lower Side Band

GHz

17.0

-

27.0

Frequency Range (LO)

GHz

15.0

-

29.0

Frequency Range (IF)

GHz

DC

-

2.0

Output Return Loss RF (S22)

dB

-

7.0

-

Input Return Loss LO (S11)

dB

-

8.0

-

Small Signal Conversion Gain IF/RF (S21)

dB

-

0.0

-

LO Input Drive (PLO)

Isolation LO/RF

Input Power for 1 dB Compression (P1dB)1,2

Input Third Order Intercept (IIP3)1,2

dBm

-

+12.0

-

dB

-

10.0

-

dBm

-

+2.0

-

dBm

-

+12.0

-

Drain Bias Voltage (Vd)

VDC

-

+3.0 +5.5

Gate Bias Voltage (Vg)

VDC

-1.0

-0.5

0.0

Supply Current (Id) (Vd=3.0V, Vg=-0.5V Typical)

mA

-

23

46

(1) Optional power bias Vd=5.5V, Id=45mA will typically yield improved P1dB.

(2) Measured using constant current.

Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099

Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com

Page 1 of 5

Characteristic Data and Specifications are subject to change without notice. ©2005 Mimix Broadband, Inc.

Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept

their obligation to be compliant with U.S. Export Laws.

Share Link: