DS2E-ML2-DC5V(2015) 데이터 시트보기 (PDF) - Panasonic Corporation

부품명

상세내역

제조사

DS2E-ML2-DC5V
(Rev.:2015)

1 Form C / 2 Form C, 2 A, 200 mW Nominal operating power relays - DS RELAYS

Panasonic Corporation 

DS

2. Specifications

Characteristics

Contact

Rating

Item

Arrangement

Initial contact resistance, max.

Contact material

Nominal switching capacity

Max. switching power

Max. switching voltage

Max. carrying current

Min. switching capacity (Reference value)*1

Nominal operating power

Insulation resistance (Initial)

Electrical

characteristics

Mechanical

characteristics

Expected life

Conditions

Unit weight

Between open contacts

Breakdown voltage

(Initial)

Between contact and coil

Temperature rise

Operate time [Set time] (at 20°C 68°F)

Release time [Reset time] (at 20°C 68°F)

Shock resistance

Vibration resistance

Mechanical

Electrical

Functional*2

Destructive

Functional

Destructive

Conditions for operation, transport and storage*3

Max. operating speed (at rated load)

Specifications

1 Form C

2 Form C

Max. 50 mΩ (By voltage drop 6 V DC 1A)

Ag+Au clad

2 A 30 V DC (resistive load)

60 W, 125 VA (resistive load)

220 V DC, 250 V AC

3A

10μA 10m V DC

Single side stable (M type: 400 mW, S type: 200 mW);

latching (M type: 360 mW, S type: 180 mW)

Min. 100MΩ (at 500V DC)

Measurement at same location as “Initial breakdown voltage” section.

1,000 Vrms for 1min.

(500 Vrms for 1min: 1 Form C type) (Detection current: 10mA.)

1,500 Vrms for 1min.

(1,000 Vrms for 1min: 1 Form C type) (Detection current: 10mA.)

Max. 65°C

(By resistive method, nominal coil voltage applied to the coil, contact carrying current: 2A.)

Max. 10 ms [10 ms] (Nominal coil voltage applied to the coil, excluding contact bounce time.)

Max. 5 ms [10 ms] (Nominal coil voltage applied to the coil, excluding contact bounce time.)

(without diode)

Min. 490 m/s2

Min. 490 m/s2

Min. 980 m/s2 (Half-wave pulse of sine wave: 6 ms.)

10 to 55 Hz at double amplitude of 3.3 mm (Detection time: 10μs.)

10 to 55 Hz at double amplitude of 5 mm

Min. 108 (107: 1 Form C latching type) (at 600 cpm)

Min. 5×105 rated load (at 60 cpm)

Ambient temperature: –40°C to +70°C –40°F to +158°F

Humidity: 5 to 85% R.H. (Not freezing and condensing at low temperature)

60 cpm

Approx. 3 g .11 oz

Approx. 4g .14oz

Notes: *1 This value can change due to the switching frequency, environmental conditions, and desired reliability level, therefore it is recommended to check this with the

actual load. TX/TX-S/TX-D relay AgPd contact type are available for low level load switching (10V DC, 10mA max. level).

*2 Half-wave pulse of sine wave: 11ms; detection time: 10μs

*3 Refer to “AMBIENT ENVIRONMENT” in GENERAL APPLICATION GUIDELINES.

–3–

ASCTB17E 201504-T

Share Link: