21-033384-201 데이터 시트보기 (PDF) - Amphenol Aerospace
부품명
상세내역
제조사
21-033384-201 Datasheet PDF : 56 Pages
| |||
Coax Contacts with High Frequency Range Amphenol
DC to 40 GHz
Aerospace
Overview
HIGH FREQUENCY
COAX CONTACTS WITH
“FLOAT MOUNT”
TECHNOLOGY
Amphenol Aerospace now offers DC to
40 GHz size 8 coaxial contacts for the
D38999 housing and standard inserts.
These contacts can be terminated to a
multiple of cable types depending on the
High Frequency Size 8 Coax
Contacts with “Float Mount“
Technology
application.
By using standard interfaces that are based on MIL-STD-348 and can be installed in
any D38999 size 8 insert, Amphenol has transformed the circular connector industry.
This technology expands the use of D38999 connectors to include the microwave
transmission lines within the multi-port configuration without change to a custom
connector.
The high frequencies are maintained by Amphenol’s unique“Float Mount”technology.
This technology allows for consistent microwave performance while maintaining tight
mechanical tolerances. This consistency provides superior electrical performance
and, unlike other blindmate connectors, will maintain an accurate phase length when
mated. See page 250 for specifications, performances and ordering of this contact.
HF38999 - D38999 Connectors
with High Frequency
Coax Contacts
38999
III
HD
Dualok
II
I
SJT
Accessories
Aquacon
Herm/Seal
PCB
High
Speed
Fiber
Optics
Contacts
Connectors
Cables
Twinax Contacts for Printed
Circuit Board Applications
PC TAIL TWINAX
CONTACTS
Amphenol provides Printed Circuit
Tail Twinax contacts for MIL-
DTL-38999 Series I and III circular
connectors and also for ARINC
404 and ARINC 600 rectangular
connectors. High reliability is
assured with factory pre-assem-
bled contacts and standardized
termination to the board.
Variety of PC Tail Twinax Contacts
See pages 255-257 for performance data and ordering of PC tail twinax contacts, and
consult Amphenol Aerospace for further information needed. Also see the Printed
Circuit Board and the Series I, II, III section for MIL-DTL-38999 connectors.
Shielded Triax Contacts
TRIAX CONTACTS WITH
THREE CONDUCTORS FOR
USE WITH TRIAX CABLE
Amphenol supplies sizes 8, 10 and 12
triax contacts for use in MIL-DTL-38999
Series I, II and III connectors. Triax con-
Triax Contacts
tacts provide additional shielding when terminated to triax
cable having solid or stranded center conductors. See cable compatibility in
the Cable Usage Guide and performance data and ordering of triax contacts
on pages 254-257. Each of the three conductors of the triax contact is separated by
dielectric insulation to isolate ground planes and to improve shielding
effectiveness. All conductors are crimp terminated for high reliability and ease of
assembly. Triax contacts may be specified for direct connection to printed circuit boards.
For maximum system flexibility, triax contacts may be mixed
with coax, twinax and power contacts in a single connector.
D38999 Connectors
with PC Tail
Twinax
Contacts
Printed Circuit Twinax Contacts provide
a cost effective packaging solution for
limited space applications where
connectors are attached to printed
circuit boards.
Rail Launch MIL-STD-1760
Connector with
Triax Contacts
Contact Amphenol Aerospace for more information at 800-678-0141 • www.amphenol-aerospace.com 217
Share Link: 