HBV101M0J0606-TR0 데이터 시트보기 (PDF) - Unspecified
부품명
상세내역
제조사
HBV101M0J0606-TR0 Datasheet PDF : 6 Pages
| |||
Conductive Polymer Hybrid Aluminum Electrolytic Capacitors
HBV Series
Features
‧105℃, 10,000 hours assured
‧Low ESR and High ripple current
‧RoHS Compliance
HBV
(Tentative)
Specifications
Items
Category Temperature Range
Capacitance Tolerance
Leakage Current (at 20℃)*
Tanδ (at 120Hz, 20℃)
Performance
-55℃ ~ +105℃
±20%
Rated voltage ≦ 63V: I = 0.01CV or 3 (μA) whichever is greater (after 2 minutes)
Rated voltage ≧ 80V: I = 0.05CV or 100 (μA) whichever is greater (after 2 minutes)
Where, C = rated capacitance in μF V = rated DC working voltage in V
See Standard Ratings
Marking color: Dark Green
(at 120Hz, 20℃)
Endurance
Shelf Life
Test Time
Capacitance Change
Tanδ
ESR
Leakage Current
10,000 Hrs
Within ±30% of initial value
Less than 200% of specified value
Less than 200% of specified value
Within specified value
* The above Specifications shall be satisfied when the capacitors are restored to 20℃ after the rated voltage applied with rated
ripple current for 10,000 hours at 105℃.
After storage for 1000 hours at 105 ± 2℃ with no voltage applied and then being stabilized at +20℃, capacitors shall meet the
limits specified in Endurance. (With voltage treatment)
Resistance to Soldering Heat *
Capacitance Change
Tanδ
ESR
Leakage Current
Within ±10% of initial value
Within specified value
Within specified value
Within specified value
Ripple Current &
Frequency Multipliers
Frequency (Hz)
Multiplier
120 ≦ f < 1k
0.10
1k ≦ f < 10k
0.3
10k ≦ f < 100k
0.6
* For any doubt about measured values, measure the leakage current again after the following voltage treatment.
Voltage treatment: Applying DC rated voltage to the capacitors for 2 hours at 105 ℃.
100k≦ f < 500k
1.0
Diagram of Dimensions
φD±0.5
B±0.2
0.4 max
P
C±0.2
Lead Spacing and Diameter
Unit: mm
φD
L
A
B
C
W
P ± 0.2
6.3
5.8 ± 0.3
6.6 6.6 7.2 0.5 ~ 0.8 2.0
6.3
7.7 ± 0.3
6.6 6.6 7.2 0.5 ~ 0.8 2.0
8
10.0 ± 0.5 8.4 8.4 9.0 0.7 ~ 1.1 3.1
8
12.0 ± 0.5 8.4 8.4 9.0 0.7 ~ 1.1 3.1
10
10 ± 0.5
10.4 10.4 11.0 0.7 ~ 1.3 4.7
10
12.5 ± 0.5 10.4 10.4 11.0 0.7 ~ 1.3 4.7
Marking
φD = 6.3 mm
φD = 8 ~ 10 mm
1
Share Link: 