1.5KE36C 데이터 시트보기 (PDF) - General Semiconductor
부품명
상세내역
제조사
1.5KE36C Datasheet PDF : 6 Pages
| |||
1.5KE6.8 THRU 1.5KE440CA
TRANSZORB™ TRANSIENT VOLTAGE SUPPRESSOR
Breakdown Voltage - 6.8 to 440 Volts Peak Pulse Power - 1500 Watts
Case Style 1.5KE
0.210 (5.3)
0.190 (4.8)
DIA.
1.0 (25.4)
MIN.
0.375 (9.5)
0.285 (7.2)
0.042 (1.07)
0.038 (0.96)
DIA.
1.0 (25.4)
MIN.
Dimensions in inches and (millimeters)
FEATURES
♦ Plastic package has Underwriters Laboratory
Flammability Classification 94V-0
♦ Glass passivated junction
♦ 1500W peak pulse power
capability on 10/1000µs waveform
repetition rate (duty cycle): 0.05%
♦ Excellent clamping capability
♦ Low incremental surge resistance
♦ Fast response time: typically less
than 1.0ps from 0 Volts to V(BR) for uni-directional
and 5.0ns for bi-directional types
♦ For devices with V(BR) >10V, ID are typically less
than 1.0µA
♦ High temperature soldering guaranteed:
265°C/10 seconds, 0.375" (9.5mm) lead length,
5lbs. (2.3 kg) tension
♦ Includes 1N6267 thru 1N6303
MECHANICAL DATA
Case: Molded plastic body over passivated junction
Terminals: Plated axial leads, solderable per MIL-STD-750,
Method 2026
Polarity: Color band denotes positive end (cathode) except
for bi-directional
Mounting Position: Any
Weight: 0.045 ounce, 1.2 grams
DEVICES FOR BI-DIRECTIONAL APPLICATIONS
For bidirectional use C or CA suffix for types 1.5KE6.8 thru types 1.5KE440A (e.g. 1.5KE6.8C, 1.5KE440CA).
Electrical characteristics apply in both directions.
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25°C ambient temperature unless otherwise specified.
Peak pulse power dissipation with a 10/1000µs
waveform (NOTE 1, Fig. 1)
Peak pulse current with a 10/1000µs waveform
(NOTE 1)
Steady state power dissipation at TL=75°C
lead lengths, 0.375" (9.5mm) (NOTE 2)
Peak forward surge current, 8.3ms single half sine-wave
superimposed on rated load (JEDEC Method)
unidirectional only (NOTE 3)
Maximum instantaneous forward voltage at 100A for
unidirectional only (NOTE 4)
Operating junction and storage temperature range
SYMBOL
PPPM
IPPM
PM(AV)
IFSM
VF
TJ, TSTG
NOTES:
(1) Non-repetitive current pulse, per Fig. 3 and derated above TA=25°C per Fig. 2
(2) Mounted on copper pad area of 1.6 x 1.6” (40 x 40mm) per Fig. 5
(3) Measured on 8.3ms single half sine-wave or equivalent square wave duty cycle=4 pulses per minute maximum
(4) VF=3.5V for devices of V(BR)≤220V and VF=5.0 Volt max. for devices of V(BR)>220V
VALUE
Minimum 1500
SEE TABLE 1
6.5
200
3.5/5.0
-55 to +175
1/21/99
UNITS
Watts
Amps
Watts
Amps
Volts
°C
Share Link: 