AA8334A 데이터 시트보기 (PDF) - Agamem Microelectronic Inc.

부품명

상세내역

제조사

AA8334A

SURROUND PROCESSOR

Agamem Microelectronic Inc. 

Agamem Microelectronics Inc.

AA8334

PRELIMINARY

SURROUND PROCESSOR

Note 6: Input current of BYP terminal (pin 3) (Vbyp=0v)

Note 7: The mute signal which switches off the power supply of a power amplifier that is

connected with AA8334 appears in the 10 terminal. When the power supply of AA8334 is

switched off, the pop noise occurs. We recommend muting the pop noise. The way is that

the power supply of AA8334 is switched off after the power supply of the follow power

amplifier is switched off.

Vcc=8V

←Tvoff→

Vcc waveform (Pin 16)

Vdet1

Vcc=0V

Vdeth

DET pin waveform (Pin 10)

Note 8: We recommend using the regulator for the power supply which occurs the ripple.

Note 9: When the signal is input in ZLIN, it is the ratio of pin 7 output voltage to pin 9

output voltage.

Note 10: When the signal is input in ZRIN, it is the ratio of pin 9 output voltage to pin 7

output voltage.

©Copyright Agamem Microelectronics Inc.

6

www.agamem.com.tw 2008/3/28

AGAMEM MICROELECTRONICS INCOPERATION RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER

NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. AGAMEM DOES NOT

ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESRIBED

HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS.

Share Link: