ADG601BRT 데이터 시트보기 (PDF) - Analog Devices
부품명
상세내역
제조사
ADG601BRT Datasheet PDF : 8 Pages
| |||
ADG601/ADG602
VDD
VSS
IDD
ISS
GND
S
D
IN
VD (VS)
RON
RFLAT(ON)
IS (OFF)
ID (OFF)
ID, IS (ON)
VINL
VINH
IINL(IINH)
CS (OFF)
CD (OFF)
CD,CS(ON)
CIN
tON
tOFF
Charge Injection
Off Isolation
On Response
Insertion Loss
TERMINOLOGY
Most Positive Power Supply Potential
Most Negative Power Supply Potential
Positive Supply Current
Negative Supply Current
Ground (0 V) Reference
Source Terminal. May be an input or output.
Drain Terminal. May be an input or output.
Logic Control Input
Analog Voltage on Terminals D, S
Ohmic Resistance Between D and S
Flatness is defined as the difference between the maximum and minimum value of on-resistance as measured
over the specified analog signal range.
Source Leakage Current with the Switch “OFF”
Drain Leakage Current with the Switch “OFF”
Channel Leakage Current with the Switch “ON”
Maximum Input Voltage for Logic “0”
Minimum Input Voltage for Logic “1”
Input Current of the Digital Input
“OFF” Switch Source Capacitance. Measured with reference to ground.
“OFF” Switch Drain Capacitance. Measured with reference to ground.
“ON” Switch Capacitance. Measured with reference to ground.
Digital Input Capacitance
Delay Between Applying the Digital Control Input and the Output Switching On.
Delay Between Applying the Digital Control Input and the Output Switching Off.
A measure of the glitch impulse transferred from the digital input to the analog output during switching.
A measure of unwanted signal coupling through an “OFF” Switch.
Frequency Response of the “ON” Switch
Loss Due to the ON Resistance of the Switch
Typical Performance Characteristics
5
4
؎2.5V
3
؎4.5V
2
TA ؍25 C
؎3V
؎3.3V
1
؎5V
0
–5 –4 –3 –2 –1 0 1 2 3 4 5
VD, VS – V
TPC 1. On Resistance vs. VD(VS)
(Dual Supply)
10
9
VDD ؍2.7V
8
VDD ؍3.0V
7
6
5
4
VDD ؍3.3V
VDD ؍4.5V
3
2
1
TA ؍25 C
VSS ؍0V
VDD ؍5.0V
0
0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0
VD, VS – V
TPC 2. On Resistance vs. VD(VS)
(Single Supply)
5
VDD ؍+5V
VSS – ؍5V
4
3
+85 C
+25 C
2
1
–40 C
0
–5 –4 –3 –2 –1 0 1 2 3 4 5
VD, VS – V
TPC 3. On Resistance vs. VD(VS) for
Different Temperatures (Dual Supply)
REV. 0
–5–
Share Link: 