ATC25 데이터 시트보기 (PDF) - Atmel Corporation
부품명
상세내역
제조사
ATC25 Datasheet PDF : 11 Pages
| |||
Input/Output Pad Cell
Libraries
IO25lib and IO33lib
The Atmel Input/Output Cell Library, IO25lib, contains a comprehensive list of input, out-
put, bidirectional and tristate cells. The ATC25 (2.5V) cell library includes a special set
of I/O cells, IO33lib, for interfacing with external 3V devices.
Voltage Levels
The IO25lib library is made up exclusively of low-voltage chip interface circuits powered
by a voltage in the range of 2.25V to 2.75V. The library is compatible with the SClib 2.5-
volt standard cells library.
Power and Ground Pads
Designers are strongly encouraged to provide three kinds of power pairs for the IO25lib
library. These are “AC”, “DC” and core power pairs. AC power is used by the I/O to
switch its output from one state to the other. This switching generates noise in the AC
power buses on the chip. DC power is used by the I/O to maintain its output in a steady
state. The best noise performance is achieved when the DC power buses on the chip
are free of noise; designers are encouraged to use separate power pairs for AC and DC
power to prevent most of the noise in the AC power buses from reaching the DC power
buses. The same power pairs can be used to supply both DC power to the I/Os and
power to the core without affecting noise performance.
Table 6. VSS Power Pad Combinations
Core
Switching I/O
Quiet I/O
Vssi
VssAC
VssDC
•
•
•
•
•
•
•
•
•
•
Library Cell
Name
pv25i00
pv25a00
pv25d00
pv25e00
pv25b00
pv25f00
Signal Name
VSS
VSS
VSS
VSS
VSS
VSS
Table 7. VDD Power Pad Combinations
Core
Switching I/O
Quiet I/O
Vddi
VddAC
VddDC
•
•
•
•
•
•
•
•
•
•
Library Cell
Name
pv25i25
pv25a25
pv25d25
pv25e25
pv25b25
pv25f25
Signal Name
VDD
VDD
VDD
VDD
VDD
VDD
4 ATC25 Summary
1306DS–CBIC–09/02
Share Link: 