Pin Description
Pin No. Symbol
5 W–
6 W+
7 V–
8 V+
9
U–
10 U+
Pin voltage
2.2V min
VCC –0.7V max
11 HB
1.5V typ
(IH = 5mA)
LB1890M
Unit (resistance: Ω)
Equivalent circuit
Pin description
• W-phase hall-effect input pin.
W+ > W– is established when logic is at an “H”
level.
• V-phase hall-effect input pin.
V+ > V– is established when logic is at an
“H” level.
• U-phase hall-effect input pin.
U+ > U– is established when logic is at an
“H” level.
• Minus pin for hall-effect bias.
When stopped, switches open and hall-
effect bias severs.
12 FC
13 I+
14 I–
1.5V min
VCC –0.5V max
15 SL
“L”: 0.8V max
“H”: 2.0V min
17 X1
• Frequency characteristics revision pin
By installing a capacitor between this pin
and GND, close-loop oscillation for the
current control system halts.
• Index input pin.
When the I+ pin is at an “L” level, I1 operates
with the fixed current of I1 = 10 µA and when
at an “H” level, I1 does not flow.
Hysteresis width is determined by the
resistor attached externally to the I+ pin.
• Time changeover pin.
1 : 1.2
“L” level : “H” level
• Reference clock generating pin.
18 X2
19 GND
• Ground pin.
Grounded as with pins 1 and 36.
Continued on next page.
No. 4354-4/8