DS1300-3 데이터 시트보기 (PDF) - Emerson Network Power
부품명
상세내역
제조사
DS1300-3 Datasheet PDF : 4 Pages
| |||
Logic Control
PS_ON An active low signal that turns on the 12vdc power rail. When this signal
POK
PS FAIL
AC OK
PRESENT
High, or left open, the 12vdc output turn off. The 3.3Vsb output remains on.
Is a power good signal to be pulled low by the power supply to indicate that
all the outputs are within regulation limits of the power supply. (turn-on
delay 100 - 500mS)
In the event of a power supply failure (OVP at any output, UV at any output,
OTP or other electrical failure), this signal shall go to a High state.
High when AC is not OK, Low if AC is OK
Low i f PSU is Present, High if not Present; Pull high in system.
FAN FAIL Low if one or both fans have failed
PS_KILL This pin shall quickly turn off the power supply and prevent arching of
the DC output contacts.
Environmental Specifications
Operating temperature:
-10° to 50°C ; 50% power derating at 70°C
Storage temperature:
-40°C to +85°C
Altitude, operating 10,000ft.
Electromagnetic
EN61000-3-2, -3-3
susceptibility / Input transients: EN61000-4-2, 4.3, 4-4, -4-5, 4-11 Level
EN55024:1998
RoHS, RS5
Humidity:
5 to 95% RH, non-condensing
Shock and vibration specificatons complies with Astec Std. Specifications, Q3205
MTBF (Demonstrated)
500K Hrs at full load, 50°C
Anti-smoke Emission
Due to internal overload or internal failures
Fan life:
70,000 hrs @ 40°C
Embedded Power for
Business-Critical Continuity
Rev. 01.26.06
DS1300-3
2 of 4
Ordering Information
Output
Nominal Output
Voltage Set Point
Main (>90VAC) 12.00vdc
Main (180VAC) 12.00vdc
Std-By
3.3vdc
Set Point
Tolerance
±0.2%
±0.2%
±1%
Total
Regulation
±3%
±3%
±3%
Minimum
Current
0A
1.0A
0.5A
Maximum
Current
74A
106A
7.0A
Output Ripple
P/P
120mV
120mV
50mV
Share Link: 