KIA6282K 데이터 시트보기 (PDF) - Tiger Electronic

부품명

상세내역

제조사

KIA6282K

4.6W DUAL AUDIO POWER AMPLIFIER

Tiger Electronic 

D6282

As the oscillation allowance varies according to the printed pattern layout, the

standard printed board is recommended to be referred to design it

5. INPUT VOLTAGE

When the excessive signal is input, turning-up is produced in the clip waveform.

T h e t u r n i n g - u p p o i n t i s V I N = 3 0 0 m Vr m s ( Ty p . ) : V c c = 9 V, R L = 4 Ω , f = 1 k H z : E n o u g h

care must be taken for this phenomenon.

6. POWER ON/OFF SWITCH

There is power ON/OFF switch at pin 3. However, output power is changed by pin

3 supply voltage when pin 3 voltage in not same pin 12 supply voltage, after

referring to attached date, select pin 3 supply voltage.

7. GND LINE

GND pin is not separated for Pre-GND and for Pw-GND. That is liable to cause

distortion and cross talk worse. Before use this IC, please check it.

CHARACTERISTICS CURVES

Share Link: