M52758SP 데이터 시트보기 (PDF) - Vishay Semiconductors

부품명

상세내역

제조사

M52758SP

Wide Band Analog Switch

Vishay Semiconductors 

M52758SP/FP

Vsth1, Vsth2 Switching Selectional Voltage

1. The condition is as Table. SG1 is as the input signal of pin 2, pin 5, pin 7, and SG7 is as the input signal of pin 8,

pin 9. There is no input at another pins.

2. Input 0 V at pin 19, confirm that there are signals output from T.P.21, T.P.22, T.P.25, T.P.27, T.P.30, T.P.35.

3. Increase gradually the voltage of terminal pin 19. Read the voltage when there is no signal output from the

terminals listed as above.

The voltage is as Vsth1.

4. SG1 as the input signal of pin 11, pin 13, pin 16, and SG7 as the input signal of pin 17, pin 18. There is no input at

another pins.

5. Inputs 5 V at pin 19, confirm that there is no signal output from T.P.21, T.P.22, T.P.25, T.P.27, T.P.30, T.P.35.

6. Decreasing gradually the voltage of terminal pin 19. Read the voltage when there are signals output from the

terminals listed as above. The voltage is as Vsth2.

Input Signal

SG No.

SG1

Input Signal

Sine wave (f = 60 kHz, 0.7 VP-P, amplitude variable)

0.7 VP-P (amplitude variable)

SG2

SG3

SG4

SG5

SG6

Sine wave (f = 1 MHz, amplitude 0.7 VP-P)

Sine wave (f = 10 MHz, amplitude 0.7 VP-P)

Sine wave (f = 100 MHz, amplitude 0.7 VP-P)

Sine wave (f = 250 MHz, amplitude 0.7 VP-P)

Pulse with amplitude 0.7 VP-P (f = 60 kHz, duty 80%)

0.7 VP-P

SG7

Square wave (Amplitude 5.0 VO-P TTL, f = 60 kHz, duty 50%)

5V

0V

Rev.2.00 Sep 14, 2006 page 9 of 14

Share Link: