M64283FP 데이터 시트보기 (PDF) - MITSUBISHI ELECTRIC

부품명

상세내역

제조사

M64283FP

Image Sensor (Artificial Retina Chip)

MITSUBISHI ELECTRIC  

Semiconductor Technical Data

MITSUBISHI

12. Description of Function

12.1. Image Capture Procedure

Reset

Mitsubishi Integrated Circuit <Linear IC>

M64283FP

Image Sensor (Artificial Retina Chip)

Set exposure time

Set an image

capture mode

Set parameters

Start image

capture

Image

capture

End

Figure 2. Operation Flow Chart

Image capture is executed according to the procedure in Fig. 2. First, reset all the registers of the chip,

and then program the registers. To reset the chip, set both XRST and RESET to "L". There are10 sets of

registers, each 8 bit. Input data format is supposed to be 11 bits (x 10 sets), the first 3 bits are for address

and the last 8 bits are for data. Each input data bit is fetched on the rising edge of XCK. The contents of a

register, address from 0 to 7, become valid on the falling edge of XCK when both LOAD and TADD are

8/35

Specifications and information in this document are subject to change without notice.

Ver. 2. 2. 3

07/22/1998

Share Link: