PN511 데이터 시트보기 (PDF) - NXP Semiconductors.

부품명

상세내역

제조사

PN511

Transmission Module

NXP Semiconductors. 

NXP Semiconductors

PN511

Transmission Module

3. Features

„ Highly integrated analog circuitry to demodulate and decode responses

„ Buffered output drivers to connect an antenna with minimum number of external

components

„ Integrated RF Level detector

„ Integrated data mode detector

„ ISO 14443A/Mifare support

„ Typical operating distance in Reader/Writer mode for communication to a ISO 14443A/

Mifare or FeliCa card up to 50 mm depending on the antenna size, tuning and power

supply

„ Typical operating distance in NFCIP-1 mode up to 50 mm depending on the antenna

size and tuning and power supply

„ Typical operating distance in ISO 14443A/Mifare card or FeliCa Card Operation mode

of about 100 mm depending on the antenna size and tuning and the external field

strength

„ Mifare Classic encryption in Reader/Writer mode support

„ ISO 14443A higher transfer speed communication at 212 kbit/s and 424 kbit/s

„ Contactless communication according to the FeliCa scheme at 212 kbit/s and

424 kbit/s

„ Integrated RF interface for NFCIP-1 up to 424 kbit/s

„ S2C interface

„ Supported host controller interfaces

‹ SPI interface up to 10 Mbit/s

‹ I2C interface up to 400 kbit/s in Fast mode, up to 3400 kbit/s in High-speed mode

‹ serial UART in different transfer speeds up to 1228.8 kbit/s, framing according to

the RS232 interface with voltage levels according pad voltage supply

‹ 8-bit parallel interface with and without Address Latch Enable

„ Comfortable 64 byte send and receive FIFO-buffer

„ Flexible interrupt modes

„ Hard reset with low power function

„ Power-down mode per software

„ Programmable timer

„ Internal oscillator to connect 27.12 MHz quartz

„ 2.5-3.6 V power supply

„ CRC Co-processor

„ Free programmable I/O pins

„ Internal self test

082733

Product short data sheet

Rev. 3.3 — 13 June 2007

© NXP B.V. 2007. All rights reserved.

3 of 22

Share Link: