PS2703-1(2003) 데이터 시트보기 (PDF) - California Eastern Laboratories.

부품명

상세내역

제조사

PS2703-1
(Rev.:2003)

HIGH ISOLATION VOLTAGE HIGH COLLECTOR TO EMITTER VOLTAGE TYPE SOP MULTI PHOTOCOUPLER

California Eastern Laboratories. 

PS2703-1

NOTES ON HANDLING

1. Recommended soldering conditions

(1) Infrared reflow soldering

• Peak reflow temperature

• Time of peak reflow temperature

• Time of temperature higher than 220°C

• Time to preheat temperature from 120 to 180°C

• Number of reflows

• Flux

260°C or below (package surface temperature)

10 seconds or less

60 seconds or less

120±30 s

Three

Rosin flux containing small amount of chlorine (The flux with a

maximum chlorine content of 0.2 Wt% is recommended.)

Recommended Temperature Profile of Infrared Reflow

180˚C

120˚C

120±30 s

(preheating)

(heating)

to 10 s

to 60 s

260˚C MAX.

220˚C

Time (s)

(2) Wave soldering

• Temperature

• Time

• Preheating conditions

• Number of times

• Flux

260°C or below (molten solder temperature)

10 seconds or less

120°C or below (package surface temperature)

One (Allowed to be dipped in solder including plastic mold portion.)

Rosin flux containing small amount of chlorine (The flux with a maximum chlorine

content of 0.2 Wt% is recommended.)

(3) Cautions

• Fluxes

Avoid removing the residual flux with freon-based and chlorine-based cleaning solvent.

2. Cautions regarding noise

Be aware that when voltage is applied suddenly between the photocoupler’s input and output or between

collector-emitters at startup, the output side may enter the on state, even if the voltage is within the absolute

maximum ratings.

8

Data Sheet PN10242EJ01V0DS

Share Link: