DatasheetQ Logo
Electronic component search and free download site. Transistors,MosFET ,Diode,Integrated circuits

RMPA0913C-58 데이터 시트보기 (PDF) - Unspecified

부품명
상세내역
제조사
RMPA0913C-58
ETC
Unspecified ETC
RMPA0913C-58 Datasheet PDF : 8 Pages
1 2 3 4 5 6 7 8

R aytheon Commercial E lectronics
RMPA0913C-58
3.5V AMPS/CDMA Power Amplifier
Description
Features
The RMPA0913C-58 is a monolithic high efficiency power amplifier for AMPS/
CDMA dual mode applications in the 824 to 849 MHz frequency band.
Performance parameters may be slightly adjusted by “tweaking” off-chip
matching components. The amplifier circuit design is a single ended
configuration that utilizes harmonic tuning for increased power added efficiency
and linearity. The device uses Raytheon’s Pseudomorphic High Electron
Mobility Transistor (pHEMT) process.
 Positive supply voltage of 3.5V, nominal
 Power Added Efficiency of 56%, typical, at power out of 31.5 dBm
 Power Added Efficiency of 40%, typical, for CDMA power out of 28.5 dBm
 Small outline metal based quad plastic package
Electrical
Characteristics
(Specifications at
25 oC operating
free air
temperature
unless
otherwise
stated)
Parameter
Frequency Range
Gain (Small Signal)
Gain Variation vs Temp
Gain Linearity
(0 dBm Pout 28.5 dBm)
Noise Power (869-894 MHz)
Input VSWR (50)
Stability (All spurious) 1
Harmonics (Po 31.5 dBm)
Power Out
Vdd=3.5V, Pin=7 dBm
Efficiency
Pin = 7 dBm, Vdd=3.5V
Po = 31.5 dBm, Vdd = 3.5V
Po = 28.5 dBm, Vdd=3.5V
Po = 10 dBm, Vdd=3.5V
ACPR 2 (Offset ± 900 kHz)
(Offset ± 1.98 MHz)
Noise Figure (over temp)
Vdd
Vg1, Vg2 (<4 mA)3
Case Operating Temp
Min
824
-1.5
-1.75
-40
Typ
30.0
-0.02
32.5
62
56
40
1.5
48
63
3.5
Max
849
+0.0
-140
2.0:1
-70
-35
4.5
-0.25
+85
Unit
MHz
dB
dB/°C
dB
dBm/Hz
---
dBc
dBc
dBm
%
%
%
%
dBc
dBc
dB
Volts
Volts
°C
Notes:
1. Source/Load VSWR (All Angles) 3:1 In-Band, Load VSWR (All Angles) 20:1 Out of
Band, Valid over Case Operating Temperature Range.
2. Po 28.5 dBm at Vdd=3.5V; CDMA Waveform measured using the ratio of the average
power within a 1.23 MHz channel and within a 30 kHz bandwidth at the specified offset.
3. Vg1 adjusted for Idq (stage 1) = 35 mA, Vg2 adjusted for Idq (stage 2) = 155 mA.
Raytheon reserves the right to update or change specifications without notice.
Tel: 978-684-8663
FAX: 978-684-5480
www.raytheon.com/micro
Revised March 30,2000
Page 1
Raytheon RF Components
362 Lowell Street
Andover, MA 01810

Share Link: 

datasheetq.com  [ Privacy Policy ]Request Datasheet ] [ Contact Us ]