S05K115GS2 데이터 시트보기 (PDF) - EPCOS AG

부품명

상세내역

제조사

S05K115GS2

Leaded Varistors Taping

EPCOS AG 

Leaded Varistors

Taping

Taping modes/reel types

Taped varistors have the letter “G” appended to the type designation.

The different tapes and matching reel types are identified by numbers as shown in the table on

page 208.

Types with lead spacing = 5, reel diameter 360 mm, have the code letter “G” while types with

lead spacing = 7,5 and 10 on 500-mm reels are identified by “G5”.

Furthermore types with lead spacing = 5 are available in Ammopack, code letters “GA”.

Versions G2, G3 and G4 are special tapes on 360-mm reels resp. Ammopack: G2 denotes the seat-

ing plane height H0 = 18 for crimped versions. Tapes G3 and G4 are available on 360-mm reels in

case the 500-mm reels are too big for your insertion machine.

Crimp styles

Both crimped and straight leads are standard for taped disk varistors. The leads are differently

crimped for technical reasons; the individual crimp styles are denoted by consecutive numbers

(S, S2 … S5) as shown in the dimensional drawings on page 212.

The crimp styles of the individual types can be seen from the type designation in the ordering tables.

Example straight leads: S10K250G5

Example crimped leads: S10K250G5S5

Lead spacing

Type series SIOV-S10 is available with two different lead spacings:

= 5,0 (wire Æ 0,6 mm)

= 7,5 (wire Æ 0,8 mm)

For taped varistors having a different lead spacing from their untaped equivalents, the actual is

appended to type designation.

Example: S10K250GS3R5

The standard lead spacing of series SIOV-S10 is

appendix “R5”.

= 7,5. The version with

= 5,0 has the

207 04/02

Share Link: