3.4 Insertion Loss
Insertion Loss of the adaptor and the measurement conditions shown in Table 4.
Figure 1 shows the measurement system.
Light-Source
Measured Adaptor
Master Cord
Master Plug
Master Plug
Optical
Power Meter
Photo Detector
Master Cord
Figure 1 Insertion loss measurement system
Table 4 Insertion loss and the measurement conditions
Parts Number
Insertion Loss
Light-Source
Conditions Wavelength
Master Cord
Terminated
SAA-1 1uu00
SAA-1 2uu00
( Slit Sleeve : Phosphor Bronze ) ( Slit Sleeve : Zirconia Ceramics )
0.7dB or Less
0.4dB or Less
LD or LED
1.3 µm
LD
1.3 µm
Flat Polishing with Buffing
PC Polishing
4. PACKING
The product is packed to prevent damage during shippment.
5. SHIPPING INSPECTION
The insertion loss inspected before shipping.
3