DatasheetQ Logo
Electronic component search and free download site. Transistors,MosFET ,Diode,Integrated circuits

SFH6343T(2003) 데이터 시트보기 (PDF) - Vishay Semiconductors

부품명
상세내역
제조사
SFH6343T
(Rev.:2003)
Vishay
Vishay Semiconductors Vishay
SFH6343T Datasheet PDF : 8 Pages
1 2 3 4 5 6 7 8
VISHAY
SFH6315T/ SFH6316T/ SFH6343T
Vishay Semiconductors
Common Mode Transient Immunity
Parameter
Common mode transient
immunity at logic high level
output
See fig. 2 and notes 3,4 and 5
Common mode transient
immunity at logic low level
output
See fig. 2 and notes 3,4 and 5
Test condition
RL = 4.1 K, IF = 0 mA,
VCM = 10 VP-P
RL = 1.9 K, IF = 0 mA,
VCM = 1500 VP-P
RL = 4.1 K, IF = 16 mA,
VCM = 10 VP-P
RL = 1.9 K , IF = 16 mA,
VCM = 10 VP-P
RL = 1.9 K , IF = 16 mA,
VCM = 1500 VP-P
Part
Symbol Min
Typ.
Max
Unit
SFH6315T |CMH|
1.0
KV/µs
SFH6316T |CMH|
1.0
SFH6343T |CMH|
15
30
SFH6315T |CML|
1.0
KV/µs
KV/µs
KV/µs
SFH6316T |CML|
1.0
SFH6343T |CML|
15
30
KV/µs
KV/µs
1. Current transfer ratio in percent equals the ratio of output collector current (IO) to the forward LED input current (IF) times 100
2. Device considered a two-terminal device: pins 1, 2, 3, and 4 shorted together and pins 5, 6, 7, and 8 shorted together.
3. Common mode transient immunity in a Logic High level is the maximum tolerable (positive) dVCM/dt on the leading edge of the common
mode pulse (VCM) to assure that the output will remain in a Logic High state (i.e., VO > 2.0 V). Common mode transient immunity in a Logic
Low level the maximum tolerable (negative) dVCM/dt on the trailing edge of the common mode pulse signal (VCM to assure that the output
will remain in Logic Low state, i.e., VO > 0.8 V).
4. The 1.9 kload represents 1 TTL unit load of 1.6 mA and the 5.6 kpull-up resistor.
5. The 4.1 kload represents 1 LSTTL unit load of 0.36 mA and the 6.1 kpull-up resistor.
6. A 0.1 µf bypass capacitor connected between pins 5 and 8 is recommended.
A
B
VCC
isfh6315t_02
1
8
IF
2
7
3
6
4
5
VCM
+–
Pulse Generator
+5 V
RL
VO
0.1 µF
VCM
90%
0 V 10%
tr
90%
10%
tf
VO
Switch at A: IF = 0 mA
VO
Switch at B: IF = 16 mA
5V
VOL
Figure 2. Test circuit for transient immunity and typical waveforms
Document Number 83677
Rev. 1.3, 20-Nov-03
www.vishay.com
5

Share Link: 

datasheetq.com  [ Privacy Policy ]Request Datasheet ] [ Contact Us ]