TC1101 데이터 시트보기 (PDF) - Unspecified

부품명

상세내역

제조사

TC1101

Low Noise and Medium Power GaAs FETs

Unspecified 

TC1101

CHIP HANDLING

DIE ATTACHMENT: Conductive epoxy or eutectic die attach is recommended. Eutectic die attach can be

accomplished with Au-Sn (80%Au-20%Sn) perform at stage temperature: 290°C ± 5°C; Handling Tool:

Tweezers; Time: less than 1min.

WIRE BONDING: The recommended wire bond method is thermocompression bonding with 0.7 to 1.0 mil

(0.018 to 0.025 mm) gold wire. Stage temperature: 220°C to 250°C; Bond Tip Temperature: 150°C; Bond

Force: 20 to 30 gms depending on size of wire and Bond Tip Temperature.

HANDLING PRECAUTIONS: The user must operate in a clean, dry environment. Care should be exercised

during handling avoid damage to the devices. Electrostatic Discharge (ESD) precautions should be observed at

all stages of storage, handling, assembly, and testing. The static discharge must be less than 300V.

TRANSCOM, INC., 90 Dasoong 7th Road, Tainan Science-Based Industrial Park, Shanhua Jen, Tainan County, Taiwan, R.O.C.

Web-Site: www.transcominc.com.tw

Phone: 886-6-5050086

Fax: 886-6-5051602

8

Share Link: