TEN20-4821WIN(2013) 데이터 시트보기 (PDF) - TRACO Electronic AG
부품명
상세내역
제조사
TEN20-4821WIN Datasheet PDF : 4 Pages
| |||
DC/DC Converters
TEN 20WIN
20 Watt
General Specifications
Reliability, calculated MTBF (MIL-HDBK-217F at +25°C, ground benign) >560’000 h
Isolation voltage (60 sec.) – Input/Output 1‘500 VDC
Isolation capacitance
– Input/Output 1500 pF max
Isolation resistance
– Input/Output >1‘000 M Ohm
Switching frequency (fixed) 400 kHz typ. (pulse width modulation PWM)
Vibration 10–55Hz, 10G, 30 minutes along X, Y, Z
Remote On/Off
– On: 3.0 to 12 VDC or open circuit.
– Off: 0 to 1.2 VDC or short circuit pin 2 and pin 6
– Off idle current: 2.5 mA typ.
Safety standards UL 60950-1, EN/IEC 60950-1
Safety approvals
– UL/cUL www.ul.com -> certifications -> File e188913
Environmental compliance – Reach www.tracopower.com/products/ten20win-reach.pdf
– RoHS RoHS directive 2011/65/EU
Physical Specifications
Casing material copper, nickel plated
Baseplate material non conductive FR4
Potting material epoxy (UL 94V-0 - rated)
Weight 27 g (0.95 oz)
Soldering temperature max. 265°C / 10 sec.
Application note: www.tracopower.com/products/ten20win-application.pdf
Power Derating
100
80
60
Natural convection with heatsink
Natural convection without heatsink
40
20
0
-40
-20
0
20
40
60
Ambient Temperature [°C]
80
100
105
All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated.
http://www.tracopower.com
Page 3 of 4
Share Link: 