AD688AQ 데이터 시트보기 (PDF) - Analog Devices
부품명
상세내역
제조사
AD688AQ Datasheet PDF : 16 Pages
| |||
DYNAMIC PERFORMANCE
The output buffer amplifiers (A3 and A4) are designed to
provide the AD688 with static and dynamic load regulation
superior to less complete references.
Many A/D and D/A converters present transient current loads
to the reference, and poor reference response can degrade the
converter’s performance.
Figure 20, Figure 21, and Figure 22 display the characteristic of
the AD688 output amplifier driving a 0 mA to 10 mA load.
A3 OR A4
VOUT
IL 1kΩ
10V
VL
10V
0V
Figure 20. Transient Load Test Circuit
200mV
5V
100
90
500ns
VOUT
10
VL
Figure 21. Large-Scale Transient Response
1mV
5V
2µs
100
90
VOUT
10
0%
VL
Figure 22. Fine-Scale Settling for Transient Load
Figure 23 and Figure 24 display the output amplifier
characteristic driving a 5 mA to 10 mA load, a common
situation found when the reference is shared among multiple
converters or is used to provide bipolar offset current.
AD688
A3 OR A4
VOUT
+
IL 2kΩ 2kΩ
10V
–
VL
10V
0V
Figure 23. Transient and Constant Load Test Circuit
1mV
200mV
1µs
VOUT 100
1mV/CM 90
VOUT
200mV/
CM
10
0%
VL
5V
Figure 24. Transient Response 5 mA to 10 mA Load
In some applications, a varying load may be both resistive and
capacitive in nature, or may be connected to the AD688 by a
long capacitive cable. Figure 25 and Figure 26 display the output
amplifier characteristics driving a 1000 pF, 0 mA to 10 mA load.
VOUT
1000pF
1kΩ
10V
CL
VL
10V
0V
Figure 25. Capacitive Load Transient Response Test Circuit
200mV
1µs
100
CL = 0 90
CL =
1000pF
10
0%
VL
5V
Figure 26. Output Response with Capacitive Load
Figure 27 and Figure 28 display the crosstalk between output
amplifiers. The top trace shows the output of A4, dc-coupled
and offset by 10 V, while the output of A3 is subjected to a 0 mA
to 10 mA load current step. The transient at A4 settles in about
1 µs, and the load-induced offset is about 100 µV.
Rev. B | Page 11 of 16
Share Link: 