1.39GHZ CCTV RADIO VIDEO LINK
TX7301
RX7301
INSTALLATION:
TRANSMITTER
Mount the camera in the correct position. Connect the video cable to VIN and GND video terminals
using 75 ohm coaxial cable with tail ends. Connect a regulated 12V power supply rated at greater than
0.5 amps to the power terminals ensuring the correct polarity.
RECEIVER
Connect the VID and GND video terminal to a monitor using 75 ohm coaxial cable with tail ends.
Connect a regulated 12V power supply rated at greater then 0.5 amps to the power terminals ensuring
the correct polarity.
PROPAGATION
With any radio system there are a number of factors which affect the system performance. These are:
• Transmitter output power
• Height of transmitter and receiver antenna
• Length and type of coaxial antenna feeder
• Topography between transmitter and receiver
• The weather
DS052_1 Oct ‘00
©2000 Reg. No. 227 4001, ENGLAND
Page 2