PDC500 데이터 시트보기 (PDF) - Power-One Inc.
부품명
상세내역
제조사
PDC500 Datasheet PDF : 4 Pages
| |||
PFC500/PDC500 Series Data Sheet
Safety, Regulatory, and EMI Specifications
PARAMETER
Agency Approvals
Dielectric Withstand
Electromagnetic Interference
ESD Susceptibility
Radiated Susceptibility
EFT/Burst (PFC500)
EFT/Burst (PDC500)
Input Transient Protection
Insulation Resistance
Leakage Current (PFC500)
CONDITIONS/DESCRIPTION
UL1950. UL 60950 / CSA60950-00 (cULus Mark)
EN60950 (TÜV). PDC500 (Pending).
Meets reinforced insulation of IEC60950.
FCC CFR title 47 Part 15 Sub-Part B - Conducted.
EN55022 / CISPR 22 Conducted.
Per EN61000-4-2, level 4.
Per EN61000-4-3, level 3.
Per EN61000-4-4, level 4.
Per EN61000-4-4, level 4.
PFC500 Per EN61000-4-5 class 3. PDC500 (class 2) Line to Line (PFC500)
Line to Ground (PFC500)
Line to Line (PDC500)
Line to Ground (PDC500)
Input to output.
Per EN60950, 264 VAC.
MIN
NOM
MAX
Approved
UNITS
B
Class
B
8
kV
10
V/M
±4
kV
TBD
kV
1
2
0.5
kV
0.5
10
M⍀
2.0
mA
Environmental Specifications
PARAMETER
Altitude
Operating Temperature
Storage Temperature
Forced Air Cooling
Temperature Coefficient
Relative Humidity
Shock
Vibration
CONDITIONS/DESCRIPTION
MIN
Operating.
Non-Operating.
Derate linearly above 50°C by 2.5% per °C.
At 100% load 0
At 50% load 0
-55
Forced air cooling of 300 LFM (400 LFM for PDC500) is required if the internal
fan is not specified Cooling air velocity is measured at the output exiting window
(2.5” x 5”). Airflow direction is from the input section to the output section.
0°C to 70°C (after 15 minute warm-up).
Non-Condensing.
5
Operating: 10±3mSec, 3 axis, Half Sine.
Non-operating: 10±3mSec, 3 axis, Half Sine.
Operating: 5-32Hz
32-2000Hz Sinusoidal
Non-operating:
NOM
MAX
UNITS
10k ASL Ft.
40k ASL Ft.
50
°C
70
°C
85
°C
±0.02
±0.05
95
20
40
0.02
1
6.15
%/°C
%RH
G
in (DA)
GPK
GRMS
Options
DESCRIPTION
Isolation Diodes
Fan
Metric Mounting
NOTES
Add “D” as a suffix to the model number to order factory installed isolation diodes
for parallel or redundant operation. For 24V models with the “D” option, external caps
are required to meet the 1% noise/ripple spec. Power Good has a pull-up
resistor of 475⍀ on the 24V models. See Application Note #P1 for details.
Add “F” as a suffix to the model number to order integral fan.
Fan provides the required 300 LFM (400 LFM for PDC500) of forced air cooling,
or otherwise provided by the end user.
Add “M” as a suffix to the model number to order chassis with
M4 x 0.7 mounting inserts.
SIZE IMPACT
N/A
10.50" x 5.00" x 2.50"
(266.7mm x 127.0mm x 63.5mm)
N/A
AUG 01, 2003 revised to JUL 13, 2006
Page 3 of 4
www.power-one.com
Share Link: 