PI5V332Q 데이터 시트보기 (PDF) - Pericom Semiconductor Corporation

부품명

상세내역

제조사

PI5V332Q

Low On-Resistance Wideband/Video Quad with Individual Control

Pericom Semiconductor Corporation 

Definitions

Symbol

RON

IO

VIN

VEN

CIN

COFF

CON

VIH

VIL

IIH (IIL)

IOS

tON

tOFF

BW

XTALK

DG

DP

OIRR

PI5V332

Low On-Resistance Wideband/Video

Quad with Individual Control

Description

Resistance between source and drain with switch in the ON state.

Output leakage current measured at S1, S2, and D with the switch OFF.

Digital voltage at the IN pin that selects between S1 and S2 analog inputs.

A voltage that ENABLES the chip.

Capacitance at the digital inputs.

Capacitance at analog I/O (S1, S2, D) with switch OFF.

Capacitance at analog I/O (S1, S2, D) with switch ON.

Minimum input voltage for logic HIGH.

Minimum input voltage for logic LOW.

Input current of the digital input.

Minimum short circuit current for S1, S2 and D.

Propagation delay measured between 50% of the digital input to 90% of the analog output when switch is

turned ON. The peak analog voltage is 0.714V.

Propagation delay measured between 50% of the digital input to 90% of the analog output when switch is

turned OFF. The peak analog voltage is 0.714V.

Frequency response of the switch in the ON state measured at 3dB down.

Is an unwanted signal coupled from channel to channel. Measured in –dB. XTALK = 20 LOG VOUT/VIN.

This is non-adjacent crosstalk.

Differential gain is the difference measurement between two bias levels, for instance analog input signals of

0V to 0.714V.

Differential phase is the difference measurement between two bias levels, for instance analog input signals

of 0V to 0.714V.

Off isolation is the resistance (measured in –dB) between the input and output with the switch off (NO).

4

PS8118B

09/22/04

Share Link: