DatasheetQ Logo
Electronic component search and free download site. Transistors,MosFET ,Diode,Integrated circuits

MAX17600(2017) 데이터 시트보기 (PDF) - Maxim Integrated

부품명
상세내역
제조사
MAX17600
(Rev.:2017)
MaximIC
Maxim Integrated MaximIC
MAX17600 Datasheet PDF : 13 Pages
1 2 3 4 5 6 7 8 9 10 Next Last
MAX17600–MAX17605
EVALUATION KIT AVAILABLE
4A Sink/Source Current,
12ns, Dual MOSFET Drivers
General Description
The MAX17600–MAX17605 devices are high-speed
MOSFET drivers capable of sinking /sourcing 4A peak
currents. The devices have various inverting and non-
inverting part options that provide greater flexibility in
controlling the MOSFET. The devices have internal
logic circuitry that prevents shoot-through during output-
state changes. The logic inputs are protected against
voltage spikes up to +14V, regardless of VDD volt-
age. Propagation delay time is minimized and matched
between the dual channels. The devices have very fast
switching time, combined with short propagation delays
(12ns typ), making them ideal for high-frequency circuits.
The devices operate from a +4V to +14V single power
supply and typically consume 1mA of supply current. The
MAX17600/MAX17601 have standard TTL input logic
levels, while the MAX17603 /MAX17604/MAX17605 have
CMOS-like high-noise margin (HNM) input logic levels.
The MAX17600/MAX17603 are dual inverting input driv-
ers, the MAX17601/MAX17604 are dual noninverting
input drivers, and the MAX17602/MAX17605 devices
have one noninverting and one inverting input. These
devices are provided with enable pins (ENA, ENB) for
better control of driver operation.
These devices are available in 8-pin (3mm x 3mm) TDFN,
8-pin (3mm x 5mm) µMAX®, and 8-pin SO packages and
operate over the -40°C to +125°C temperature range.
Applications
● Power MOSFET Switching
● Switch-Mode Power Supplies
● DC-DC Converters
● Motor Control
● Power-Supply Modules
Ordering Information appears at end of data sheet.
Features
● Dual Drivers with Enable Inputs
● +4V to +14V Single Power-Supply Range
● 4A Peak Sink /Source Current
● Inputs Rated to +14V, Regardless of VDD Voltage
● Low 12ns Propagation Delay
● 6ns Typical Rise and 5ns Typical Fall Times with
1nF Load
● Matched Delays Between Channels
● Parallel Operation of Dual Outputs for Larger
Driver Output Current
● TTL or HNM Logic-Level Inputs with Hysteresis for
Noise Immunity
● Low Input Capacitance: 10pF (typ)
● Thermal Shutdown Protection
TDFN, μMAX, and SO Package Options
● -40°C to +125°C Operating Temperature Range
Typical Operating Circuit
VDD
(UP TO +14V) VDD
INA
MAX17600
MAX17601
MAX17602
MAX17603
MAX17604
MAX17605
ENA
OUTA
ENB
OUTB
INB
GND
μMAX is a registered trademark of Maxim Integrated
Products, Inc.
19-6177; Rev 2; 6/17

Share Link: 

datasheetq.com  [ Privacy Policy ]Request Datasheet ] [ Contact Us ]