MAX2117 데이터 시트보기 (PDF) - Maxim Integrated
부품명
상세내역
제조사
MAX2117 Datasheet PDF : 20 Pages
| |||
Complete, Direct-Conversion Tuner for
MMDS Applications
ABSOLUTE MAXIMUM RATINGS
VCC to GND ...........................................................-0.3V to +3.9V
All Other Pins to GND.................................-0.3V to (VCC + 0.3V)
RF Input Power: RFIN .....................................................+10dBm
VCOBYP, CPOUT, REFOUT, XTAL, IOUT_, QOUT_, IDC_, and
QDC_ Short-Circuit Protection.............................................10s
CAUTION! ESD SENSITIVE DEVICE
Continuous Power Dissipation (TA = +70°C)
28-Pin Thin QFN (derated 34.5mW/°C above +70°C)........2.75W
Operating Temperature Range...............................0°C to +70°C
Junction Temperature ......................................................+150°C
Storage Temperature Range .............................-65°C to +160°C
Lead Temperature (soldering, 10s) .................................+300°C
Soldering Temperature (reflow) .......................................+260°C
Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional
operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to
absolute maximum rating conditions for extended periods may affect device reliability.
DC ELECTRICAL CHARACTERISTICS
(MAX2117 Evaluation Kit: VCC = +3.13V to +3.47V, VGC1 = +0.5V (max gain), TA = 0°C to +70°C. No input signals at RF, baseband
I/Os are open circuited, and LO frequency = 1000MHz. Default register settings except BBG[3:0] = 1011. Typical values measured
at VCC = +3.3V, TA = +25°C, unless otherwise noted.) (Note 1)
PARAMETER
CONDITIONS
MIN TYP MAX UNITS
SUPPLY
Supply Voltage
Supply Current
Receive mode, bit STBY = 0
Standby mode, bit STBY = 1
3.13
3.3
3.47
V
100 160
mA
3
ADDRESS SELECT INPUT (ADDR)
Digital Input-Voltage High, VIH
Digital Input-Voltage Low, VIL
Digital Input-Current High, IIH
Digital Input-Current Low, IIL
ANALOG GAIN-CONTROL INPUT (GC1)
Input Voltage Range
Maximum gain = 0.5V
2.4
V
0.5
V
50
µA
-50
µA
0.5
2.7
V
Input Bias Current
VCO TUNING VOLTAGE INPUT (VTUNE)
Input Voltage Range
2-WIRE SERIAL INPUTS (SCL, SDA)
-50
+50
µA
0.4
2.3
V
Clock Frequency
400
kHz
Input Logic-Level High
0.7 x
V
VCC
Input Logic-Level Low
Input Leakage Current
2-WIRE SERIAL OUTPUT (SDA)
Output Logic-Level Low
Digital inputs = GND or VCC
ISINK = 1mA
0.3 x
V
VCC
±0.1 ±1
µA
0.4
V
2 _______________________________________________________________________________________
Share Link: 