RNF-100-1-CL-FSP 데이터 시트보기 (PDF) - TE Connectivity
부품명
상세내역
제조사
RNF-100-1-CL-FSP Datasheet PDF : 5 Pages
| |||
Specification values
Physical
Electrical
Chemical
Property
Dimensions
Longitudinal change
Tensile strength
Ultimate elongation
Secant modulus (as supplied)
Specific gravity
Low temperature flexibility
(4 hours at -55°C/-67°F)
Heat shock
(4 hours at 250°C/482°F)
Heat resistance
(336 hours at 175°C/347°F)
Followed by test for:
Ultimate Elongation
Color
Color stability
(48 hours at 175°C/347°F)
Dielectric strength
Volume resistivity
Copper mirror corrosion
(16 hours at 175°C/347°F)
Copper contact corrosion
(168 hours at 160°C/320°F)
Copper stability
(16 hours at 160°C/320°F)
Unit
mm (inches)
percent
psi (Mpa)
percent
psi (Mpa)
percent
volts/mil (volts/mm)
ohm-cm
Followed by test for:
Ultimate Elongation
Flammability
percent
Fungus resistance
Water absorption
(24 hours at 23°C/73°F)
percent
Fluid resistance
(24 hours at 23°C/73°F) in:
JP-8 fuel (MIL-T-5624)
Skydrol 500
Hydraulic fluid (MIL-H-5606)
Aviation gasoline100/300
(MIL-G-5572)
Water
Followed by tests for:
Dielectric strength
volts/mil (volts/mm)
Tensile strength
psi (Mpa)
Note: Consult RT-350 for specific details about test procedures.
Raychem is a trademark of Tyco Electronics Corporation.
Requirement
Type 1 (colors)
See Reverse
+0, -5
1500 (10.3) minimum
200 minimum
2.5 X 104 (172) maximum
1.35 maximum
No cracking
No dripping,
flowing, or cracking
150 minimum
MIL-STD-104
MIL-STD-104
500 (19,680) minimum
1014 minimum
No removal of copper
No pitting or blackening
of copper
No brittleness, glazing,
cracking, or severe
discoloration of tubing
200 minimum
Self-extinguishing
within 1 minute, 25%
maximum flag burn
Rating of 1 or less
0.5 maximum
400 (15,760) minimum
1000 (6.9) minimum
Type 2 (clear)
See Reverse
+0, -5
1500 (10.3) minimum
200 minimum
2.5 X 104 (172) maximum
1.0 maximum
No cracking
Method of test
ASTM D 2671
ASTM D 2671
ASTM D 2671
ASTM D 2671
ASTM D 2671
ASTM D 2671
AMS-DTL-23053
No dripping,
flowing, or cracking
AMS-DTL-23053
ASTM D 2671
150 minimum
ASTM D 2671
MIL-STD-104
ASTM D 2671
500 (19,680) minimum
1016 minimum
No removal of copper
No pitting or blackening
of copper
No brittleness, glazing,
cracking, or severe
discoloration of tubing
ASTM D 2671
ASTM D 2671
ASTM D 2671
Procedure A
ASTM D 2671
Procedure B
ASTM D 2671
Procedure B
200 minimum
Rating of 1 or less
0.2 maximum
ASTM D 2671
ASTM D 2671
Procedure B
ASTM G 21
ASTM D 2671
ASTM D 2671
400 (15,760) minimum
1000 (6.9) minimum
ASTM D 2671
ASTM D 2671
Users should independently evaluate the suitability of the product for their application.
Tyco Electronics Corporation
300 Constitution Drive
Menlo Park, CA 94025-1164
USA
Tel: (800) 926-2425 (US & Canada)
Tel: +1 (650) 361-3860 (All other countries)
Faraday Road
Dorcan, Swindon, SN3 5HH
United Kingdom
Tel: +44 1793 528171
3816 Noborito, Tama-ku
Kawasaki, Kanagawa 214-8533
Japan
Tel: +81 44 900 5102
Asia Pacific Headquarters
26 Ang Mo Kio, Industrial Park 2
Singapore 569507
Tel: +65 4866 151
All information, including illustrations, is believed to be reliable. Users, however, should independently evaluate the suitability of each product for their application. Tyco Electronics Corporation makes
no warranties as to the accuracy or completeness of the information, and disclaims any liability regarding its use. Tyco Electronics Corporation’s only obligations are those in the Standard Terms and
Conditions of Sale for these products and in no case will Tyco Electronics Corporation be liable for any incidental, indirect, or consequential damages arising from the sale, resale, use, or misuse of the
product. Tyco Electronics Corporation’s Specifications are subject to change without notice. In addition, Tyco Electronics Corporation reserves the right to make changes in materials or processing
without notification to the Buyer which do not affect compliance with any applicable specification.
For more information about this product visit www.tycoelectronics.com
Share Link: 