AD7173-8 데이터 시트보기 (PDF) - Analog Devices
부품명
상세내역
제조사
AD7173-8
Analog Devices
AD7173-8 Datasheet PDF : 64 Pages
| |||
Data Sheet
Low Power, 8-/16-Channel, 31.25 kSPS,
24-Bit, Highly Integrated Sigma-Delta ADC
AD7173-8
FEATURES
Low power, 8-/16-channel, highly integrated multiplexed
analog-to-digital converter (ADC)
Integration
Precision analog input buffers and reference input buffers
2.5 V precision reference (3.5 ppm/°C)
Cross point multiplexer (enable system diagnostic)
8 full differential or 16 single-ended channels
Clock oscillator
GPIO and GPO pins with automatic external mux control
Fast and flexible output rate: 1.25 SPS to 31.25 kSPS
Channel scan data rate: 6.21 kSPS/channel (161 µs settling)
Performance specifications
17.5 noise free bits at 31.25 kSPS
24 noise free bits at 1.25 SPS
INL: ±3 ppm/FSR
85 dB rejection of 50 Hz and 60 Hz with 50 ms settling
Operates with either 3.3 V or5 V supply
Single supply
3.3 V or 5 V AVDD1, 2 V to 5 V AVDD2, and 2 V to 5 V IOVDD
Optional split supply
AVDD1 and AVSS ± 2.5 V or AVDD1 and AVSS ± 1.65 V
Current: 1.4 mA
3-/4-wire serial digital interface (Schmitt trigger on SCLK)
CRC error checking
SPI, QSPI, MICROWIRE, and DSP compatible
Package: 40-lead 6 mm × 6 mm LFCSP
Temperature range: −40°C to +105°C
APPLICATIONS
Process control: PLC/DCS modules
Voltage, current, temperature, and pressure measurement
Flow meters
Medical and scientific multichannel instrumentation
Seismic instrumentation
Chemical analysis instrumentation: chromatography
GENERAL DESCRIPTION
Fast settling, highly accurate, low power, 8-/16-channel,
multiplexed ADC for low bandwidth input signals with
integrated input buffers.
Integrated precision, 2.5 V, low drift (3.5 ppm/°C), band gap
reference and integrated oscillator.
Eight flexible setups with configurability for output data rate,
digital filter mode, offset/gain error correction, reference selection,
buffer enables and more. This per channel configurability extends
to the output data rate used for each channel when using
sinc5 + sinc1 filter.
Sinc5 + sinc1 filter maximizes channel scan rate, and sinc3 filter
maximizes resolution and enhanced 50 Hz/60 Hz rejection,
with four selectable options to maximize rejection.
Integrated diagnostic features, including CRC, register checksum,
temperature sensor, crosspoint multiplexer, burnout currents,
and GPIOs/GPOs.
AIN0/REF2–
AIN1/REF2+
AIN15
AIN16
FUNCTIONAL BLOCK DIAGRAM
AVDD1 AVDD2 REGCAPA
REF– REF+ REFOUT
IOVDD REGCAPD
1.8V
LDO
CROSSPOINT
MULTIPLEXER
REFERENCE
INPUT
BUFFERS
BUFFERED
PRECISION
REFERENCE
1.8V
LDO
AVDD ANALOG
INPUT
BUFFERS
Σ-Δ ADC
INT
REF
DIGITAL
FILTER
SERIAL
INTERFACE
AND CONTROL
AVSS
I/O AND EXTERNAL
MUX CONTROL
TEMPERATURE
SENSOR
XTAL AND INTERNAL
CLOCK OSCILLATOR
CIRCUITRY
AD7173-8
CS
SCLK
DIN
DOUT/RDY
SYNC
ERROR
AVSS
PDSW
GPIO0 GPIO1 GPO2 GPO3
XTAL1 XTAL2/CLKIO
Figure 1.
DGND
Rev. B
Document Feedback
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700 ©2013–2017 Analog Devices, Inc. All rights reserved.
Technical Support
www.analog.com
Share Link: