25AA160C(2009) 데이터 시트보기 (PDF) - Microchip Technology
부품명
상세내역
제조사
25AA160C Datasheet PDF : 30 Pages
| |||
25XX160C/D
1.0 ELECTRICAL CHARACTERISTICS
Absolute Maximum Ratings(†)
VCC.............................................................................................................................................................................6.5V
All inputs and outputs w.r.t. VSS .......................................................................................................... -0.6V to VCC+1.0V
Storage temperature .................................................................................................................................-65°C to 150°C
Ambient temperature under bias ...............................................................................................................-40°C to 125°C
ESD protection on all pins ..........................................................................................................................................4 kV
† NOTICE: Stresses above those listed under “Absolute Maximum Ratings” may cause permanent damage to the
device. This is a stress rating only and functional operation of the device at those or any other conditions above those
indicated in the operational listings of this specification is not implied. Exposure to maximum rating conditions for an
extended period of time may affect device reliability.
TABLE 1-1: DC CHARACTERISTICS
DC CHARACTERISTICS
Industrial (I):
TA = -40°C to +85°C
Automotive (E): TA = -40°C to +125°C
VCC = 1.8V to 5.5V
VCC = 2.5V to 5.5V
Param.
No.
Sym.
Characteristic
Min.
Max. Units
Test Conditions
D001 VIH1
D002
D003
D004
D005
D006
VIL1
VIL2
VOL1
VOL2
VOH
D007 ILI
D008 ILO
D009 CINT
High-level input
voltage
Low-level input
voltage
Low-level output
voltage
High-level output
voltage
Input leakage current
Output leakage
current
Internal Capacitance
(all inputs and
outputs)
0.7 VCC
-0.3
-0.3
—
—
VCC-0.5
—
—
—
VCC+1
0.3 VCC
0.2 VCC
0.4
0.2
—
±1
±1
7
V—
V VCC ≥ 2.7V
V VCC < 2.7V
V IOL = 2.1 mA
V IOL = 1.0 mA, VCC < 2.5V
V IOH = -400 μA
μA CS = VCC, VIN = VSS OR VCC
μA CS = VCC, VOUT = VSS OR VCC
pF TA = 25°C, CLK = 1.0 MHz,
VCC = 5.0V (Note)
D010 ICC Read
—
Operating Current
—
5
mA VCC = 5.5V; FCLK = 10.0 MHz;
SO = Open
2.5
mA VCC = 2.5V; FCLK = 5.0 MHz;
SO = Open
D011 ICC Write
—
5
mA
—
3
mA
D012 ICCS
—
5
μA
Standby Current
—
1
μA
Note: This parameter is periodically sampled and not 100% tested.
VCC = 5.5V
VCC = 2.5V
CS = VCC = 5.5V, Inputs tied to VCC or
VSS, +125°C
CS = VCC = 5.5V, Inputs tied to VCC or
VSS, +85°C
DS22150A-page 2
© 2009 Microchip Technology Inc.
Share Link: 