MX25L1606EZUI-12G 데이터 시트보기 (PDF) - Macronix International

부품명

상세내역

제조사

MX25L1606EZUI-12G

3V, 16M-BIT [x 1/x 2] CMOS SERIAL FLASH MEMORY

Macronix International 

MX25L1606E

16M-BIT [x 1 / x 2] CMOS SERIAL FLASH

FEATURES

GENERAL

• Single Power Supply Operation

- 2.7 to 3.6 volt for read, erase, and program opera-

tions

• Supports Serial Peripheral Interface -- Mode 0 and

Mode 3

• 16,777,216 x 1 bit structure or 8,388,608 x 2 bits (Dual

Output mode) structure

• 512 Equal Sectors with 4K byte each

- Any Sector can be erased individually

• 32 Equal Blocks with 64K byte each

- Any Block can be erased individually

• Program Capability

- Byte base

- Page base (256 bytes)

• Latch-up protected to 100mA from -1V to Vcc +1V

PERFORMANCE

• High Performance

- Fast access time: 86MHz serial clock

- Serial clock of Dual Output mode : 80MHz

- Fast program time: 0.6ms(typ.) and 3ms(max.)/page

- Byte program time: 9us (typ.)

- Fast erase time: 40ms(typ.) /sector ; 0.4s(typ.) /block

• Low Power Consumption

- Low active read current: 25mA(max.) at 86MHz

- Low active programming current: 15mA (typ.)

- Low active sector erase current: 9mA (typ.)

- Low standby current: 15uA (typ.)

- Deep power-down mode 2uA (typ.)

• Typical 100,000 erase/program cycles

• 20 years of data retention

SOFTWARE FEATURES

• Input Data Format

- 1-byte Command code

• Advanced Security Features

- Block lock protection

The BP3-BP0 status bit defines the size of the area

to be software protection against program and

erase instructions

- Additional 512 bit secured OTP for unique identifier

• Auto Erase and Auto Program Algorithm

- Automatically erases and verifies data at selected

sector

- Automatically programs and verifies data at select-

ed page by an internal algorithm that automatically

times the program pulse widths (Any page to be pro-

gramed should have page in the erased state first)

• Status Register Feature

• Electronic Identification

- JEDEC 1-byte manufacturer ID and 2-byte device

ID

- RES command for 1-byte Device ID

- REMS commands for 1-byte manufacturer ID and

1-byte device ID

• Support Serial Flash Discoverable Parameters (SFDP)

mode

HARDWARE FEATURES

• PACKAGE

- 16-pin SOP (300mil)

- 8-pin SOP (150mil)

- 8-pin SOP (200mil)

- 8-pin PDIP (300mil)

- 8-land WSON (6x5mm)

- 8-land USON (4x4mm)

- 24-Ball BGA

- All devices are RoHS Compliant and Halogen-

free

P/N: PM1548

REV. 1.8, JUN 04, 2015

5

Share Link: