DatasheetQ Logo
Electronic component search and free download site. Transistors,MosFET ,Diode,Integrated circuits

LMV821ILT 데이터 시트보기 (PDF) - STMicroelectronics

부품명
상세내역
제조사
LMV821ILT Datasheet PDF : 32 Pages
1 2 3 4 5 6 7 8 9 10 Next Last
Absolute maximum ratings and operating conditions
LMV82x, LMV82xA
2
Absolute maximum ratings and operating conditions
Table 2. Absolute maximum ratings (AMR)
Symbol
Vcc
Vid
Vin
Iin
SHDN
Tstg
Rthja
Tj
ESD
Parameter
Supply voltage(1)
Differential input voltage(2)
Input pins (IN+ and IN- pins) voltage(3)
Input current(4)
Shutdown voltage(5)
Storage temperature
Thermal resistance junction to ambient(6)(7)
– SC70-5
– SOT23-5
– DFN8 2x2
– MiniSO8
– SO8
– TSSOP14
– SO14
– SOT23-6
– MiniSO10
– TSSOP16
Maximum junction temperature
HBM: human body model (except shutdown pin)(8)
HBM: human body model (shutdown pin)(8)
MM: machine model(9)
CDM: charged device model(10)
CDM: charged device model LMV825(10)
Latch-up immunity
Value
6
±Vcc
Vcc- - 0.3 to Vcc+ + 0.3
10
Vcc- - 0.2 to Vcc+ + 0.2
-65 to +150
Unit
V
mA
V
°C
205
250
57
190
125
°C/W
100
105
240
113
95
150
°C
4
kV
3.5
250
V
1.3
kV
1
200
mA
1. All voltage values, except the differential voltage are with respect to the network ground terminal.
2. Differential voltages are the non-inverting input terminal with respect to the inverting input terminal.
3. Vcc-Vin must not exceed 6 V, Vin must not exceed 6 V.
4. The input current must be limited by a resistor in series with the inputs.
5. Vcc-Vshdn must not exceed 6 V, Vin must not exceed 6 V.
6. Short-circuits can cause excessive heating and destructive dissipation.
7. Rth are typical values.
8.
Human
device.
body model:
This is done
a 100
for all
cpoFupcalepsaocfitopriniscodmiscbhinaargtieodnsthwrohuileghotahe1r.5piknΩs
resistor between
are floating.
two
pins
of
the
9. Machine model: a 200 pF capacitor is charged to the specified voltage, then discharged directly between
two pins of the device with no external series resistor (internal resistor < 5 Ω). This is done for all couples of
pin combinations while other pins are floating.
10. Charged device model: all pins and package are charged together to the specified voltage and then
discharged directly to ground.
4/32
Doc ID 022467 Rev 3

Share Link: 

datasheetq.com  [ Privacy Policy ]Request Datasheet ] [ Contact Us ]