2701 데이터 시트보기 (PDF) - Unspecified
부품명
상세내역
제조사
2701 Datasheet PDF : 10 Pages
| |||
2700, 2701, Multimeter/Data Acquisition/
2750
Switch Systems
• Combines functions of DMM,
switch system, and datalogger
• True 6½-digit (22-bit) resolution
• Choice of 12 switch/control
plug-in modules
• Up to 200 differential input
channels (with 300V isolation)
for measurement and control
• Convenient front panel inputs
• Free LabVIEW®, LabWindows/
CVI, Visual Basic, and C/C++
drivers (IVI style)
• Ethernet, GPIB, RS-232
communications capabilities
• Free ExceLINX™-1A datalogging
software
Integra Series systems (2700, 2701, 2750) com-
bine precision measurement, switching, and
control in a single, tightly integrated enclosure
for either rack-mounted or benchtop applica-
tions. These cost-effective, high performance
test platforms offer affordable alternatives to
separate DMMs and switch systems, dataloggers/
recorders, plug-in card data acquisition equip-
ment, and VXI/PXI systems. The Integra Series
plug-in switching and control modules offer
unmatched flexibility and testing efficiency for
a wide range of industries and applications.
System builders can create test solutions with a
combination of channel count, cost per c hannel,
and system performance unmatched by any
other single-box measurement system. The
input modules provide the flexibility to vary the
channel count from 20 to 200 (2-pole), apply a
stimulus to the device under test, route signals,
control system components, and make precision
measurements with up to 14 functions. Robust
digital I/O capabilities can be used for triggering,
handshaking with other automation equipment,
and alarm limit outputs. Scan rates of up to 500
channels/second (up to 3500 readings/second on
a single channel) will increase test productivity.
Fast Setup and Operation
The Integra systems are fully integrated, off-the-shelf measurement and control systems. Their DMM-
like interfaces make it easy for users to collect data and/or perform troubleshooting within minutes
of installation and startup. Once sensor or DUT leads are hooked to the instrument’s input, use the
front panel controls to select the measurement function, range, filtering, scaling, trigger source, scan-
ning sequence, alarms, and more. The free ExceLINX-1A software makes it easy to configure and use
the system in a graphical “point-and-click” environment. This gives developers the basic tools needed
to create a simple application without writing program code.
The Advantage of Integrated Design
The Integra systems offer a variety of advantages over existing solutions for ATE and data acquisition
applications. For example, their flexible modular architecture and integrated measurement, switch-
ing, and control capabilities save rack space by reducing the number of separate instruments needed.
This design also simplifies expanding the system as the number of channels grows or re-purposing
it as new test requirements evolve. Integrated signal conditioning, scaling, stimulus, filtering and
I/O capabilities eliminate the need for external
circuitry when designing and building data
acquisition systems. The Integra systems offer
accuracy and repeatability superior to plug-in
Built-in measurement functions
include:
data acquisition boards, while providing faster
test times than typical DMM/switch systems. This
makes it possible to combine higher test yields
with higher test throughput.
• DCV • ACV • DCI • ACI
• Resistance (2- or 4-wire, offset
compensation selectable)
Ethernet
• Dry circuit ohms (20mV
clamp) 2750 only
The Model 2701 offers a 10/100 BaseT Ethernet
connection for high speed and long distance
communication between a computer and a virtu-
ally infinite number of instruments. Any PC with
• Temperature (with thermo
couples, RTDs, or thermistors)
• Frequency/Period
an Ethernet port can connect to a single Model
• Continuity
1. 888 .KEITHLEY (U.S. only)
www.keithley.com
A Greater Measure of Confidence
Share Link: 