2701 데이터 시트보기 (PDF) - Unspecified

부품명

상세내역

제조사

2701

Multimeter/Data Acquisition/ Switch Systems

Unspecified 

2700, 2701, Multimeter/Data Acquisition/

2750

Switch Systems

Ordering Information

2700

2701

2750

DMM, Data Acquisition,

Datalogging System

w/2 Slots

DMM, Data Acquisition,

Datalogging System

w/2 Slots and

Ethernet Support

DMM, Data Acquisition,

Switching, Datalogging

System w/5 Slots

Accessories Supplied

LabVIEW, LabWindows/ CVI, Visual

Basic, and C/C++ drivers; manual;

and Model 1751 Safety Test Leads.

2701 in a point-to-point configuration, to multiple Model 2701s through a hub, or to multiple Model

2701s distributed on a network.

The Model 2701 Ethernet port uses the industry-standard TCP/IP socket interface. This provides data

rates up 100Mbits/sec. and allows the instrument to be located up to 100 meters from the nearest

­computer or network hub in hardwired systems and miles in wireless Ethernet systems. The maxi-

mum distances between a control PC and the instruments are limited only by the size of the network.

The instrument also provides a built-in diagnostic Web page for easy remote access to the Model

2701. Entering the instrument’s IP address in the URL line of Microsoft Internet Explorer will allow

communication with and control of the Model 2701. This Web page allows users to read and set net-

work parameters, such as IP address, subnet mask, gateway, MAC address, and calibration dates, and

to send commands to and query data from the Model 2701.

Temperature Capabilities

Integra Series mainframes support three major types of temperature sensors with built-in signal

conditioning and 300V isolation: thermocouples, RTDs, and thermistors. To begin using a sensor,

simply hook it up and the instrument does the rest. If a thermocouple is broken or disconnected,

the instrument will alert the operator. The mainframes also support three methods for cold-junction

compensation (CJC): automatic (built-in), external (built-in), and simulated.

Accessories Available

2750-321A Extra slot cover

7007-1

Shielded IEEE-488 Cable, 1m (3.3 ft.)

(Models 2700, 2750 only)

7007-2

Shielded IEEE-488 Cable, 2m (6.6 ft.)

(Models 2700, 2750 only)

7788

50-Pin D-Shell Connector Kit (2 each)(for Models

7703, 7705 Modules w/D-sub Connectors)

7789

50-Pin/25-Pin D-Shell Kit (1 each)

7790

50-Pin Male, 50-Pin Female, and 25-Pin Male IDC

D-Shell Connector Kit (1 each) (Ribbon Cable

not Included)

7797

Calibration Extender Board (for Model 2750)

7705-MTC-2 50-Pin Male to Female D-Sub Cable, 2m

7707-MTC-2 25-Pin Male to Female D-Sub Cable, 2m

KPCI-488LPA IEEE-488 Interface/Controller for the PCI Bus

(Models 2700, 2750 only)

KUSB-488B IEEE-488 USB-to-GPIB Interface Adapter (Models

2700, 2750 only)

Services Available

2700-3Y-EW

1-year factory warranty extended to 3 years

from date of shipment

2701-3Y-EW

1-year factory warranty extended to 3 years

from date of shipment

2750-3Y-EW

1-year factory warranty extended to 3 years

from date of shipment

C/2700-3Y-ISO 3 (ISO-17025 accredited) calibrations within 3

years of purchase*

C/2701-3Y-ISO 3 (ISO-17025 accredited) calibrations within 3

years of purchase*

C/2750-3Y-ISO 3 (ISO-17025 accredited) calibrations within 3

years of purchase*

*Not available in all countries

Install up to five input modules in the 2750 mainframe (or up to two in the 2700 and 2701

mainframes). All switch/control modules are fully enclosed in impact-resistant plastic for

exceptional ruggedness. Three connector alternatives simplify connecting the modules to DUTs.

Rugged D-sub connectors allow quick, secure connections and are especially convenient when

performing routine maintenance or when the system is installed in a rack. IDC ribbon cable

adapters are supplied with the Model 7701, 7707, and 7709 modules for fast, uncomplicated

hookups in production test and process monitoring applications. Oversize screw-terminal

connectors simplify setup in applications that require the greatest connection flexibility.

Additional D-sub and IDC ribbon cable connector kits and pre-wired cable assemblies are

sold ­separately.

Typical Applications

• Production test of electronic

products and devices

• Accelerated stress testing (AST)

• Process monitor and control

• Device characterization/R&D

• Low ohms, multichannel

measurements

1. 888 .KEITHLEY (U.S. only)

www.keithley.com

A Greater Measure of Confidence

Share Link: