ITCSN-0400 데이터 시트보기 (PDF) - 3M

부품명

상세내역

제조사

ITCSN-0400

3M™ Heavy Wall Heat Shrink Tubing ITCSN

3M 

3M™ Heavy Wall Heat Shrink Tubing ITCSN

Product Selection

Selecting 3M™ Heavy Wall Heat Shrink Tubing ITCSN is easy and straightforward.

The largest tubing size that provides a tight fit when fully recovered will produce the

maximum wall thickness. Final wall thickness is proportional to the degree of tubing

recovery.

Listed Catalogue Number

ITCSN-0400

ITCSN-0800

ITCSN-1100

ITCSN-1500

ITCSN-2000

Wire Size

12 - 6

8 - 1/0

2 - 4/0

3/0 - 400

250 - 750

Specifications

The heat shrink tubing must be chemically cross-linked, thermally stabilized

polyolefin, capable of operation at cable emergency overload temperatures of 266ºF

(130ºC). The tubing must have UL Listing (UL 486D, 600V) and be approved for the

use and be CSA Certified. Supplied tubing lengths of 4 feet and less shall be

adhesive lined. The minimum shrink temperature shall be 250ºF (121ºC).

Engineering/

Architectural

Specifications

The tubing must be usable in both indoor and outdoor applications on cables rated up

to 1000 volts. It is resistant to moisture, mild acids and alkalies, fuels, oils, ozone, or

ultraviolet light. It is compatible with and adheres to most types of cable jackets,

including rubber, plastic or lead.

Performance Tests

UL 486D – The 3M ITCSN tubing was subjected to the requirements of UL 486D and

passed all tests. This tubing is UL Listed per UL 486D and CSA Certified.

Installation

Techniques

A detailed instruction sheet regarding proper installation is included in each

kit. A brief summary of the installation steps is outlined as follows:

1. Thoroughly clean and prepare cable

2. Slide 3M ITCSN tubing onto cable

3. Install connector, if applicable

4. Center tubing

5. Shrink tubing from center

6. Heat until tubing is completely shrunk and adhesive/sealant (if applicable) is

squeezed from ends

3 of 4

Share Link: