74ABT543A(2010) 데이터 시트보기 (PDF) - NXP Semiconductors.
부품명
상세내역
제조사
74ABT543A Datasheet PDF : 15 Pages
| |||
NXP Semiconductors
74ABT543A
Octal latched transceiver with dual enable; 3-state
Table 6. Static characteristics …continued
Symbol Parameter
Conditions
II
IOFF
IO(pu/pd)
IOZ
ILO
IO
ICC
∆ICC
CI
CI/O
input leakage current VCC = 5.5 V; VI = GND or 5.5 V
OEAB, OEBA
An, Bn
power-off leakage
current
VCC = 0.0 V; VI or VO ≤ 4.5 V
power-up/power-down VCC = 2.1 V; VO = 0.5 V;
output current
VI = GND or VCC;
OEAB, OEBA don’t care
OFF-state output
current
VCC = 5.5 V; VI = VIL or VIH
VO = 2.7 V
VO = 0.5 V
output leakage current HIGH-state; VO = 5.5 V;
VCC = 5.5 V; VI = GND or VCC
output current
VCC = 5.5 V; VO = 2.5 V
supply current
VCC = 5.5 V; VI = GND or VCC
outputs HIGH-state
outputs LOW-state
outputs disabled
additional supply
current
input capacitance
input/output
capacitance
per input pin; VCC = 5.5 V;
one input pin at 3.4 V, other inputs
at VCC or GND
VI = 0 V or VCC
outputs disabled; VO = 0 V or VCC
25 °C
−40 °C to +85 °C Unit
Min Typ Max Min Max
- ±0.01 ±1.0
-
- ±5.0 ±100 -
- ±5.0 ±100 -
[1] - ±5.0 ±50
-
±1.0 µA
±100 µA
±100 µA
±50 µA
- 5.0 50
-
- −5.0 −50
-
- 5.0 50
-
[2] −180 −65 −40 −180
50 µA
−50 µA
50 µA
−40 mA
- 110 250
-
- 20 30
-
- 110 250
-
[3] -
0.3 1.5
-
250 µA
30 mA
250 µA
1.5 mA
-
4
-
-
-
7
-
-
- pF
- pF
[1] This parameter is valid for any VCC between 0 V and 2.1 V, with a transition time of up to 10 ms. From VCC = 2.1 V to VCC = 5 V ± 10 %,
a transition time of up to 100 ms is permitted.
[2] Not more than one output should be tested at a time, and the duration of the test should not exceed one second.
[3] This is the increase in supply current for each input at 3.4 V.
10. Dynamic characteristics
Table 7. Dynamic characteristics
GND = 0 V; for test circuit, see Figure 10.
Symbol Parameter
Conditions
tPLH
LOW to HIGH
An to Bn or Bn to An; see Figure 5
propagation delay LEBA to An or LEAB to Bn; see Figure 6
tPHL
HIGH to LOW
An to Bn or Bn to An; see Figure 5
propagation delay LEBA to An or LEAB to Bn; see Figure 6
tPZH
OFF-state to HIGH OEBA to An, OEAB to Bn; see Figure 7
propagation delay EBA to An, EAB to Bn; see Figure 7
25 °C; VCC = 5.0 V −40 °C to +85 °C; Unit
VCC = 5.0 V ± 0.5 V
Min Typ Max Min
Max
1.0 2.9 4.5 1.0
5.2 ns
1.0 3.4 5.1 1.0
6.2 ns
1.9 3.6 5.2 1.9
5.7 ns
2.1 4.3 6.0 2.1
6.7 ns
1.0 3.2 5.1 1.0
6.2 ns
1.0 3.4 5.1 1.0
6.2 ns
74ABT543A_3
Product data sheet
Rev. 03 — 26 January 2010
© NXP B.V. 2010. All rights reserved.
6 of 15
Share Link: 