JSM1AF-12V-5 데이터 시트보기 (PDF) - Panasonic Corporation
부품명
상세내역
제조사
JSM1AF-12V-5 Datasheet PDF : 3 Pages
| |||
GLOBAL STANDARD
TERMINAL PITCH
AUTOMOTIVE
POWER RELAY
JS-M
JS-M RELAYS
22
.866
16
.630
16.4
.646
mm inch
RoHS Directive compatibility information
http://www.nais-e.com/
FEATURES
• Low pick-up voltage for high ambient
use
• Sealed construction
• Global standard terminal pitch
• Usable at high temperature: 85°C
185°F
TYPICAL APPLICATIONS
• Power-window
• Car antenna
• Door lock
• Intermittent wiper
• Interior lighting
• Power seat
• Power sunroof
• Car stereo
• Horn
• Lift gate, etc.
SPECIFICATIONS
Contact
Standard type
High capacity
type
Arrangement
1 Form A, 1 Form C
Contact material
Ag alloy (Cadmium free)
Initial contact resistance
(By voltage drop 6 V DC 1 A)
*Max. 100 mΩ *Max. 100 mΩ
Contact voltage drop
Max. 0.2 V DC (at 10 A 12 V DC)
Nominal switching
capacity
10 A 16 V DC 15 A 16 V DC
(resistive)
(resistive)
Rating
Max. carrying current
Max. switching power
25 A (at 20°C 68°F for 2 minutes)
15 A (at 20°C 68°F for 1 hour)
20 A (at 85°C 185°F for 2 minutes)
10 A (at 85°C 185°F for 1 hour)
160 W
Max. switching voltage
16 V DC
Max. switching current
10 A
15 A
(10 A max.
at 85°C)
Min. switching capacity#1
1 A 12 V DC
Mechanical life
Expected (at 180 cpm)
life (min.
ope.)
Electrical
(at 15 cpm)
Resistive
107
105
N.O.: 105
N.C.: 5×104
* Measured after operating 5 times at the rated load
Coil
Nominal operating power
640 mW
Contact rating
Load
Max. carry current
Max. make current
Max. break current
Standard type
Form C
Form A
N.O. N.C.
15 A 15 A 15 A
25 A 25 A 10 A
10 A 10 A 10 A
High capacity type
Form C
Form A
N.O. N.C.
15 A 15 A 15 A
50 A 50 A 15 A
15 A 15 A 15 A
Characteristics
Max. operating speed
(at rated load)
15 cps.
Initial insulation resistance*1
Min. 100 MΩ (at 500 V DC)
Initial
Between open contacts
breakdown Between contacts and
voltage*2 coil
750 Vrms for 1 min.
1,500 Vrms for 1 min.
Operate time*3 (at nominal voltage)
Max. 10 ms
Release time (without diode)*3
(at nominal voltage)
Max. 10 ms
Shock resistance
Functional*4
Destructive*5
Min. 98 m/s2 {10 G}
Min. 980 m/s2 {100 G}
Vibration resistance
Functional*6
Destructive
10 Hz to 55 Hz
at double amplitude of 1.6 mm
10 Hz to 55 Hz
at double amplitude of 2 mm
Conditions for operation,
transport and storage*7
(Not freezing and
condensing at low
temperature)
Ambient
temp.
Humidity
–40°C to +85°C
–40°F to +185°F
5% R.H. to 85% R.H.
Mass
Approx. 12 g .423 oz
#1 This value can change due to the switching frequency, environmental conditions,
and desired reliability level, therefore it is recommended to check this with the
actual load.
Remarks
*1 Measurement at same location as “Initial breakdown voltage” section
*2 Detection current: 10mA
*3 Excluding contact bounce time
*4 Half-wave pulse of sine wave: 11ms; detection time: 10µs
*5 Half-wave pulse of sine wave: 6ms
*6 Detection time: 10µs
*7 Refer to Conditions for operation, transport and storage mentioned in AMBIENT
ENVIRONMENT
ORDERING INFORMATION
Ex. JSM
12V
Contact arrangement
Protective construction
1a: 1 Form A
1: 1 Form C
Nil: Sealed construction
F: Flux-resistant type
Note: Standard packing: Carton: 100 pcs. Case: 500 pcs.
Coil voltage (DC)
12 V
Contact material
4: Standard type (10 A)
5: High capacity type (15 A)
All Rights Reserved © COPYRIGHT Matsushita Electric Works, Ltd.
Share Link: 