78M6618-PDU-1 데이터 시트보기 (PDF) - Maxim Integrated

부품명

상세내역

제조사

78M6618-PDU-1

78M6618 PDU1 Firmware Quick Start Guide

Maxim Integrated 

UG_6618_122

78M6618 PDU1 Firmware Quick Start Guide

1 Introduction

The 78M6618 PDU1 Firmware is a turnkey energy measurement solution optimized for use in

single-phase AC Power Distribution Units (PDUs). At the sensor interface, the 78M6618 with PDU1

Firmware provides eight sense inputs for current and two sense inputs for voltage (single-phase). At the

host interface, either a UART or SPI interface can be used to issue configure the device and access the

following measurement data:

• RMS Voltage

• RMS Current (Line1, Line2,..Line8)

• Active Power (Line1, Line2,..Line8)

• Apparent Power (Line1, Line2,..Line8)

• Reactive Power (Line1, Line2,..Line8)

• Power Factor (Line1, Line2,..Line8)

• Energy (Line1, Line2,..Line8)

• Line Frequency

Fully functional demo code can be evaluated in an Evaluation Kit (EVK) and used as is in some

applications. It can also serve as starting base for customization and adaptation to different system buses

with an optional Software Development Kit (SDK).

This document overviews the steps for

• Getting Started with the EVK

• Getting Started with the SDK

• Getting Started with Flash Programming

Rev. 0

3

Share Link: