MCIMX280DVM4B 데이터 시트보기 (PDF) - Freescale Semiconductor

부품명

상세내역

제조사

MCIMX280DVM4B

i.MX28 Applications Processors Data Sheet for Consumer Products

Freescale Semiconductor 

The i.MX28 processor includes an additional 128-Kbyte on-chip SRAM to make the device ideal for

eliminating external RAM in applications with small footprint RTOS.

The i.MX28 supports connections to various types of external memories, such as mobile DDR, DDR2 and

LV-DDR2, SLC and MLC NAND Flash.

The i.MX28 can be connected to a variety of external devices such as high-speed USB2.0 OTG, CAN,

10/100 Ethernet, and SD/SDIO/MMC.

1.1 Device Features

The following lists the features of the i.MX28:

• ARM926EJ-S CPU running at 454 MHz:

— 16-Kbyte instruction cache and 32-Kbyte data cache

— ARM embedded trace macrocell (CoreSight™ ETM9™)

— Parallel JTAG interface

• 128 KBytes of integrated low-power on-chip SRAM

• 128 KBytes of integrated mask-programmable on-chip ROM

• 1280 bits of on-chip one-time-programmable (OCOTP) ROM

• 16-bit mobile DDR (mDDR) (1.8 V), DDR2 (1.8 V) and LV-DDR2 (1.5 V), up to 205 MHz DDR

clock frequency with voltage overdrive

• Support for up to eight NAND flash memory devices with up to 20-bit BCH ECC

• Four synchronous serial ports (SSP) for SDIO/MMC/MS/SPI. Two can be used for

SDIO/MMC/MS interfaces (supports SD2.0, eMMC4.4 and MSPro), and all can be used for the

SPI interface.

• 10/100-Mbps Ethernet MAC compatible with IEEE Std 802.3™, supporting

IEEE Std 1588™-compatible hardware timestamp. Also supports 50-MHz/25-MHz clock output

for external Ethernet PHY.

• Two 2.0B protocol-compatible Controller Area Network (CAN) interfaces

• One USB2.0 OTG device/host controller and PHY

• One USB2.0 host controller and PHY

• LCD controller, up to 24-bit RGB (DOTCK) modes and 24-bit system-mode

• Pixel-processing pipeline (PXP) supports full path from color-space conversion, scaling,

alpha-blending to rotation without intermediate memory access.

• SPDIF transmitter

• Dual serial audio interface (SAIF) to support full-duplex transmit and receive operations; each

SAIF supports three stereo pairs

• Five application Universal Asynchronous Receiver-Transmitters (UARTs), up to 3.25 Mbps with

hardware flow control

• One debug UART operating at up to 115 Kb/s using programmed I/O

• Two I2C master/slave interfaces, up to 400 kbps

• Four 32-bit timers and a rotary decoder

i.MX28 Applications Processors Data Sheet for Consumer Products, Rev. 1

2

Freescale Semiconductor

Share Link: